900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




NXP Semiconductors Electronic Components Datasheet

CBTL06GP212 Datasheet

High performance DisplayPort switch

No Preview Available !

CBTL06GP212
High performance DisplayPort switch with high
common-mode voltage support
Rev. 1 — 2 May 2012
Product brief
1. General description
The CBTL06GP212 is a six-channel (‘hex’) multiplexer for DisplayPort and PCI Express
applications at Generation 2 (‘Gen2’) speeds. It provides four differential channels
capable of 1 : 2 switching or 2 : 1 multiplexing (bidirectional and AC-coupled) PCI Express
or DisplayPort signals, using high-bandwidth pass-gate technology. It provides support for
high common-mode/bias voltage on the high speed differential channels. Additionally, it
provides for switching/multiplexing of the Hot Plug Detect signal as well as the AUX or
DDC (Direct Display Control) signals, for a total of six channels on the display side. The
AUX and DDC channels provide a four-position multiplexer such that an additional level of
multiplexing can be accomplished when AUX and DDC I/Os are on separate pins of the
display source device.
The CBTL06GP212 is designed for Gen2 speeds, at 5.0 Gbit/s for PCI Express or
5.4 Gbit/s for DisplayPort. It consumes 2 mA current (typical) in operational mode and
provides a shutdown function to support battery-powered applications.
A typical application of CBTL06GP212 is on motherboards where one of two GPU display
sources needs to be selected to connect to a display sink device or connector. A controller
chip selects which path to use by setting a select signal HIGH or LOW. Due to the
non-directional nature of the signal paths (which use high-bandwidth pass gate
www.DataSheet.net/
technology), the CBTL06GP212 can also be used in the reverse topology, e.g., to connect
one display source device to one of two display sink devices or connectors.
2. Features
1 : 2 switching or 2 : 1 multiplexing of DisplayPort RON on DP high-speed channels: 6 Ω
(v1.2 - 5.4 Gbit/s) or PCI Express (v2.0 - 5.0 Gbit/s) Low insertion loss:
signals
0.5 dB at 100 MHz
4 high-speed differential channels with
2 : 1 muxing/switching for DisplayPort or
PCI Express signals
1 channel with 4 : 1 muxing/switching
1.5 dB at 1.35 GHz
2.5 dB at 2.7 GHz
Low crosstalk: 35 dB at 2.7 GHz
Low off-state isolation: 30 dB at 2.7 GHz
for AUX at 1 Mbit/s or DDC signals
Low return loss: 8 dB at 2.7 GHz
1 channel with 2 : 1 muxing/switching
Very low intra-pair skew (5 ps typical)
for single-ended HPD signal
Very low inter-pair skew (< 80 ps)
High-bandwidth analog pass-gate technology
3 dB bandwidth at 5 GHz
Supports a wide range of common-mode/bias
Switch/multiplexer position select CMOS input
voltage on high speed differential channels
Shutdown mode CMOS input
Supports high-speed signal switching over a wide Supports backdrive protection
common-mode range and differential swing
Single 3.3 V power supply
Datasheet pdf - http://www.DataSheet4U.co.kr/


NXP Semiconductors Electronic Components Datasheet

CBTL06GP212 Datasheet

High performance DisplayPort switch

No Preview Available !

NXP Semiconductors
CBTL06GP212
High performance DisplayPort 1.2 switch
Operation current of 2 mA typical, shut-down current 10 μA maximum
ESD 2 kV HBM, 500 V CDM
Available in 5 mm × 5 mm, 0.5 mm ball pitch TFBGA48 package
3. Applications
Motherboard applications requiring DisplayPort and PCI Express
switching/multiplexing
Docking stations
Notebook computers
Chip sets requiring flexible allocation of PCI Express or DisplayPort I/O pins to board
connectors
4. Ordering information
Table 1. Ordering information
Type number
Solder process
CBTL06GP212EE/G Pb-free (SnAgCu
solder compound)
Package
Name
TFBGA48
Description
plastic thin fine-pitch ball grid array package;
48 balls; body 5 × 5 × 0.8 mm[1]
[1] Total height including solder balls after printed circuit board mounting = 1.15 mm.
Version
SOT918-1
VDD
DIN1_n+
DIN1_n−
DIN2_n+
DIN2_n−
CBTL06GP212
4
0
4
1
4
DAUX1+
DAUX1−
DAUX2+
DAUX2−
DDC_CLK1
DDC_DAT1
DDC_CLK2
DDC_DAT2
00
10
01
11
AUX+ or SCL
AUX− or SDA
HPD_1
HPD_2
0
1
GPU_SEL
DDC_AUX_SEL
XSD
GND
Fig 1. Functional diagram
www.DataSheet.net/
DOUT_n+
DOUT_n−
AUX+
AUX−
HPDIN
© NXP B.V. 2012.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 2 May 2012
Document identifier: CBTL06GP212
CBTL06GP212
Product brief
Rev. 1 — 2 May 2012
© NXP B.V. 2012. All rights reserved.
2 of 2
Datasheet pdf - http://www.DataSheet4U.co.kr/


Part Number CBTL06GP212
Description High performance DisplayPort switch
Maker NXP Semiconductors
PDF Download

CBTL06GP212 Datasheet PDF






Similar Datasheet

1 CBTL06GP212 High performance DisplayPort switch
NXP Semiconductors
2 CBTL06GP213 Second-generation high performance general purpose switch
NXP





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy