UJA1162A Datasheet | NXP Semiconductors

Self-supplied high-speed CAN transceiver with Sleep mode Rev. 1 - 23 August 2019 Product data sheet 1. General description The UJA1162A is a ‘self-supplied’ high-speed CAN transceiver integrating an ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 pliant HS-CAN transceiver and an internal 5 V CAN supply. The only supply input is a battery connection. The UJA1162A can be operated in very-low-current Sleep mode with local and bus wake-up capability. This implementation enables reliable munication in the CAN FD fast phase at data rates up to 5 Mbit/s. 2. Features and benefits 2.1 General - Self-supplied ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 pliant high-speed CAN transceiver - Hardware and software patible with the UJA116x product family and with improved EMC performance - Loop delay symmetry timing enables reliable munication at data rates up to 5 Mbit/s in the CAN FD fast phase - Autonomous bus biasing according to ISO 11898-6 - Fully integrated 5 V supply (VBUF) for the CAN transmitter/receiver - VIO input allows for direct interfacing with 3.3 V to 5 V microcontrollers - Bus connections are truly floating when power to pin BAT is off 2.2 Designed for automotive applications - 8 k V Electro Static Discharge (ESD) protection, according to the Human Body Model (HBM) on the CAN bus pins - 6 k V ESD protection, according to IEC TS 62228 on the CAN bus pins and on pins BAT and WAKE - CAN bus pins short-circuit proof to 58 V - Battery and CAN bus pins are protected against automotive transients according to ISO 7637-3 - Very low quiescent current in Sleep mode - Leadless HVSON14 package (3 mm  4.5 mm) with improved Automated Optical Inspection (AOI) capability - Dark green product (halogen free and Restriction of Hazardous Substances (Ro HS) pliant) NXP Semiconductors Self-supplied high-speed CAN transceiver with Sleep mode 2.3 Integrated supply voltage for the CAN transceiver (VBUF) - 5 V nominal output; 2 %...