Datasheet4U Logo Datasheet4U.com

TDA8547TS - 2 x 0.7 W BTL audio amplifier with output channel switching

Description

The TDA8547TS is a two channel audio power amplifier for an output power of 2 × 0.7 W with a 16 Ω load at a 5 V supply.

At a low supply voltage of 3.3 V an output power of 0.6 W with an 8 Ω load can be obtained.

Features

  • Selection between output channels.
  • Flexibility in use.
  • Few external components.
  • Low saturation voltage of output stage.
  • Gain can be fixed with external resistors.
  • Standby mode controlled by CMOS compatible levels.
  • Low standby current.
  • No switch-on/switch-off plops.
  • High supply voltage ripple rejection.
  • Protected against electrostatic discharge.
  • Outputs short-circuit safe to ground, VCC and across.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA8547 2 x 0.7W BTL AUDIO AMPLIFIER UTC
TDA8559T Low-voltage stereo headphone amplifier Philips
TDA8566 stereo BTL car radio power amplifier NXP Semiconductors
TDA8577 Dual common-mode rejection differential line receiver Philips
TDA8588AJ Power Amplifier and Multiple Voltage Regulator Philips

Other Datasheets by NXP Semiconductors

Part Number Description
TDA8547 2 x 1 W BTL audio amplifier with output channel switching
TDA8540 4 X 4 video switch matrix
TDA8541 1 W BTL audio amplifier
TDA8542 2 x 1 W BTL audio amplifier
TDA8542AT 2 x 1.5 W BTL audio amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS DATA SHEET TDA8547TS 2 × 0.7 W BTL audio amplifier with output channel switching Product specification Supersedes data of 1997 Oct 14 1998 Apr 01 NXP Semiconductors 2 × 0.7 W BTL audio amplifier with output channel switching Product specification TDA8547TS FEATURES • Selection between output channels • Flexibility in use • Few external components • Low saturation voltage of output stage • Gain can be fixed with external resistors • Standby mode controlled by CMOS compatible levels • Low standby current • No switch-on/switch-off plops • High supply voltage ripple rejection • Protected against electrostatic discharge • Outputs short-circuit safe to ground, VCC and across the load • Thermally protected.
Published: |