Datasheet4U Logo Datasheet4U.com

TDA8510J - 26 W BTL and 2 x 13 W SE power amplifiers

Description

The TDA8510J is an integrated class-B output amplifier in a 17-lead single-in-line (SIL) power package.

It contains a 26 W Bridge-Tied Load (BTL) amplifier and 2 × 13 W Single-Ended (SE) amplifiers.

Features

  • Requires very few external components.
  • High output power.
  • Low output offset voltage (BTL channel).
  • Fixed gain.
  • Diagnostic facility (distortion, short-circuit and temperature detection).
  • Good ripple rejection.
  • Mode select switch (operating, mute and standby).
  • AC and DC short-circuit safe to ground and to VP.
  • Low power dissipation in any short-circuit condition.
  • Thermally protected.
  • Reverse polarity.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDA8547 2 x 0.7W BTL AUDIO AMPLIFIER UTC
TDA8559T Low-voltage stereo headphone amplifier Philips
TDA8566 stereo BTL car radio power amplifier NXP Semiconductors
TDA8577 Dual common-mode rejection differential line receiver Philips
TDA8588AJ Power Amplifier and Multiple Voltage Regulator Philips

Other Datasheets by NXP Semiconductors

Part Number Description
TDA8511J 4 x 13 W single-ended power amplifiers
TDA8512J 26 W BTL and 2 x 13 W SE or 4 x 13 W SE power amplifier
TDA8501 PAL/NTSC encoder
TDA8505 SECAM encoder
TDA8540 4 X 4 video switch matrix

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS DATA SHEET TDA8510J 26 W BTL and 2 × 13 W SE power amplifiers Preliminary specification Supersedes data of 1999 Jun 14 File under Integrated Circuits, IC01 1999 Dec 14 Philips Semiconductors Preliminary specification 26 W BTL and 2 × 13 W SE power amplifiers FEATURES • Requires very few external components • High output power • Low output offset voltage (BTL channel) • Fixed gain • Diagnostic facility (distortion, short-circuit and temperature detection) • Good ripple rejection • Mode select switch (operating, mute and standby) • AC and DC short-circuit safe to ground and to VP • Low power dissipation in any short-circuit condition • Thermally protected • Reverse polarity safe QUICK REFERENCE DATA SYMBOL General VP IORM Iq(tot) Istb BTL channel Po SVRR Vn(o) Zi ∆VO
Published: |