Datasheet4U Logo Datasheet4U.com

SC28L194 - Quad UART for 3.3V and 5V supply voltage

Description

The Philips 28L194 Quad UART is a single chip CMOS-LSI communications device that provides 4 full-duplex asynchronous channels with significantly deeper 16 byte FIFOs, Automatic in-band flow control using Xon/Xoff characters defined by the user and address recognition in the Wake-up mode.

Features

  • Single 3.3V and 5.0V power supply.
  • Four Philips industry standard full duplex UART channels.
  • Sixteen byte receiver FIFOs for each UART.
  • Sixteen byte transmit FIFOs for each UART.
  • In band flow control using programmable Xon/Xoff characters.
  • Flow control using CTSN RTSN hardware handshaking.
  • Automatic address detection in multi-drop mode.
  • Three byte general purpose character recognition.
  • Fast data bus, 15 ns data bu.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SC281 SFP/SFP+ CAGES&CONNECTOR VITALCONN
SC281xx SFP/SFP+ CAGES&CONNECTOR VITALCONN
SC283 1.8A Synchronous Step-Down Regulator Semtech Corporation
SC284 1.8A Synchronous Step-Down Regulator Semtech
SC286 Dual Channel 4A Synchronous Step-Down Regulator Semtech

Other Datasheets by NXP Semiconductors

Part Number Description
SC28L198 Octal UART for 3.3V and 5V supply voltage
SC28L201 high performance UART
SC28L202 Dual universal asynchronous receiver/transmitter DUART
SC28L91 3.3V-5.0V Universal Asynchronous Receiver/Transmitter (UART)
SC28L92 Dual Universal Asynchronous Receiver/Transmitter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS SC28L194 Quad UART for 3.3V and 5V supply voltage Preliminary specification Supersedes data of 1995 Dec 14 IC19 Data Handbook 1998 Sep 21 Philips Semiconductors Philips Semiconductors Preliminary specification Quad UART for 3.3V and 5V supply voltage SC28L194 DESCRIPTION The Philips 28L194 Quad UART is a single chip CMOS-LSI communications device that provides 4 full-duplex asynchronous channels with significantly deeper 16 byte FIFOs, Automatic in-band flow control using Xon/Xoff characters defined by the user and address recognition in the Wake-up mode. Synchronous bus interface is used for all communication between host and QUART.
Published: |