Datasheet4U Logo Datasheet4U.com

SC18IM700 - Master I-2C - bus controller

Description

The SC18IM700 is designed to serve as an interface between the standard UART port of a microcontroller or microprocessor and the serial I2C-bus; this allows the microcontroller or microprocessor to communicate directly with other I2C-bus devices.

The SC18IM700 can operate as an I2C-bus master.

Features

  • s s s s s s s s s s s s s s s s UART host interface I2C-bus controller Eight programmable I/O pins High-speed UART: baud rate up to 460.8 kbit/s High-speed I2C-bus: 400 kbit/s 16-byte TXFIFO 16-byte RXFIFO Programmable baud rate generator 2.3 V and 3.6 V operation Sleep mode (power-down) UART message format resembles I2C-bus transaction format I2C-bus master functions Multi-master capability 5 V tolerance on the input pins 8 N 1 UART format (8 data bits, no parity bit, 1 stop bit) Available in v.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SC18IS602 I2C-bus to SPI bridge NXP Semiconductors
SC18IS603 I2C-bus to SPI bridge NXP Semiconductors
SC183C 2A Synchronous Step-Down Regulator Semtech
SC185 4A Synchronous Step-Down Regulator Semtech
SC186 4A Synchronous Step-Down Regulator Semtech

Other Datasheets by NXP Semiconductors

Part Number Description
SC18IS600 SPI to I2C-bus interface
SC18IS601 SPI to IC-bus interface
SC18IS602B I2C-bus to SPI bridge
SC16C2550 Dual UART with 16 bytes of transmit and receive FIFOs and infrared (IrDA) encoder/decoder
SC16C2550B dual UART

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com SC18IM700 Master I2C-bus controller with UART interface Rev. 01 — 28 February 2006 Product data sheet 1. General description The SC18IM700 is designed to serve as an interface between the standard UART port of a microcontroller or microprocessor and the serial I2C-bus; this allows the microcontroller or microprocessor to communicate directly with other I2C-bus devices. The SC18IM700 can operate as an I2C-bus master. The SC18IM700 controls all the I2C-bus specific sequences, protocol, arbitration and timing. The host communicates with SC18IM700 with ASCII messages protocol; this makes the control sequences from the host to the SC18IM700 become very simple. 2.
Published: |