Datasheet4U Logo Datasheet4U.com

PTN3393 - 2-lane DisplayPort to VGA adapter

Datasheet Summary

Description

The PTN3393 is a DisplayPort to VGA adapter IC designed to connect a DisplayPort source to a VGA sink.

The PTN3393 integrates a DisplayPort receiver and a high-speed triple video digital-to-analog converter that supports display resolutions from VGA to WUXGA (see Table 5).

Features

  • 2.1 VESA-compliant DisplayPort v1.1a converter.
  • Main Link: 1-lane and 2-lane modes supported.
  • HBR (High Bit Rate) at 2.7 Gbit/s per lane.
  • RBR (Reduced Bit Rate) at 1.62 Gbit/s per lane.
  • BER (Bit Error Rate) better than 109.
  • Down-spreading SSC (Spread Spectrum Clocking) supported.
  • 1 MHz AUX channel.
  • Supports native AUX CH syntax.
  • Supports I2C-bus over AUX CH syntax.
  • Hot Plug Detect (HPD) signal to the source.
  • Cost-effective design optimized for V.

📥 Download Datasheet

Datasheet preview – PTN3393

Datasheet Details

Part number PTN3393
Manufacturer NXP
File Size 361.43 KB
Description 2-lane DisplayPort to VGA adapter
Datasheet download datasheet PTN3393 Datasheet
Additional preview pages of the PTN3393 datasheet.
Other Datasheets by NXP

Full PDF Text Transcription

Click to expand full text
PTN3393 2-lane DisplayPort to VGA adapter IC Rev. 4 — 10 June 2014 Product data sheet 1. General description The PTN3393 is a DisplayPort to VGA adapter IC designed to connect a DisplayPort source to a VGA sink. The PTN3393 integrates a DisplayPort receiver and a high-speed triple video digital-to-analog converter that supports display resolutions from VGA to WUXGA (see Table 5). The PTN3393 supports either one or two DisplayPort v1.1a lanes operating at either 2.7 Gbit/s or 1.62 Gbit/s per lane. The PTN3393 has ‘Flash-over-AUX’ capability enabling simple firmware upgradability in the field. The PTN3393 supports I2C-bus over AUX per DisplayPort v1.1a specification (Ref. 1), and bridges the VESA DDC channel to the DisplayPort Interface.
Published: |