PCK2002 Overview
18 outputs are typically used to support up to 4 SDRAM DIMMS monly found in desktop, workstation or server applications. All clock outputs meet Intel’s drive, rise/fall time, accuracy, and skew requirements. An I2C interface is included to allow each output to be enabled/disabled individually.
PCK2002 Key Features
- HIGH speed, LOW noise non-inverting 1-18 buffer
- Typically used to support four SDRAM DIMMs
- Multiple VDD, VSS pins for noise reduction
- 3.3 V operation
- Separate 3-State pin for testing
- ESD protection exceeds 2000 V per Standard 801.2
- Optimized for 66 MHz, 100 MHz and 133 MHz operation
- Typical 175 ps skew outputs
- Available in 48-pin SSOP and TSSOP packages
- See PCK2002M for mobile (reduced pincount) 28-pin 1-10 buffer