PCF85116-3 Datasheet | NXP Semiconductors

INTEGRATED CIRCUITS DATA SHEET PCF85116-3 2048 × 8-bit CMOS EEPROM with I2C-bus interface Product specification Supersedes data of 1997 Feb 24 File under Integrated Circuits, IC12 1997 Apr 02 Philips Semiconductors Product specification 2048 × 8-bit CMOS EEPROM with I2C-bus interface CONTENTS 1 2 2.1 3 4 5 6 7 8 8.1 8.2 8.3 8.4 8.4.1 8.4.2 8.4.3 8.5 8.5.1 Features DESCRIPTION Remark QUICK REFERENCE DATA ORDERING INFORMATION DEVICE SELECTION BLOCK DIAGRAM PINNING I2C-BUS PROTOCOL Bus conditions Data transfer Device addressing Write operations Byte/word write Page Write Remark Read operations Remark 9 10 11 12 13 14 14.1 14.2 14.2.1 14.2.2 14.3 14.3.1 14.3.2 14.3.3 15 16 17 LIMITING VALUES CHARACTERISTICS I2C-BUS CHARACTERISTICS WRITE CYCLE LIMITS PACKAGE OUTLINES SOLDERING Introduction DIP Soldering by dipping or by wave Repairing soldered joints SO Reflow soldering Wave soldering Repairing soldered joints DEFINITIONS LIFE SUPPORT APPLICATIONS PURCHASE OF PHILIPS I2C PONENTS 1997 Apr 02 Philips Semiconductors Product specification 2048 × 8-bit CMOS EEPROM with I2C-bus interface 1 Features 2 DESCRIPTION - Low power CMOS: - maximum operating current 1.0 m A - maximum standby current 10 µA (at 5.5 V), typical 4 µA - Non-volatile storage of 16 kbits organized as eight blocks of 256 × 8-bit each - Single supply with full operation down to 2.7 V - On-chip voltage multiplier - Serial input/output I2C-bus (100 kbits/s standard-mode and 400 kbits/s fast-mode) - Write operations: multi byte write mode up to 32 bytes - Write-protection input - Read operations: - sequential read - random read - Internal timer for writing (no external ponents) -...