PCD3332-3 Datasheet | NXP Semiconductors

INTEGRATED CIRCUITS DATA SHEET PCD3332-2; PCD3332-3; PCD3332-S Multistandard pulse/tone repertory diallers/ringers Product specification File under Integrated Circuits, IC03 1997 Jan 13 Philips Semiconductors Product specification Multistandard pulse/tone repertory diallers/ringers CONTENTS 1 2 3 4 4.1 4.2 4.3 5 5.1 5.1.1 5.1.2 5.1.3 Features GENERAL DESCRIPTION ORDERING INFORMATION PINNING PCD3332-2 PCD3332-3 PCD3332-S FUNCTIONAL DESCRIPTION 10.3 10.3.1 10.3.2 10.3.3 11 12 PCD3332-2; PCD3332-3; PCD3332-S SO Reflow soldering Wave soldering Repairing soldered joints DEFINITIONS LIFE SUPPORT APPLICATIONS Pin description Supply terminals (VDD and VSS) Oscillator input/output (XTAL1 and XTAL2) Chip enable and frequency discriminator input (CE/FDI) 5.1.4 Cradle switch input (CSI) 5.1.5 Reset input (RESET) 5.1.6 Pulse dial and flash output (DP/FL) 5.1.7 Mute output (MUTE) 5.1.8 DTMF output (TONE) 5.1.9 Register recall (EARTH) 5.1.10 Ringer Tone Enable (RTE: PCD3332-2/S) 5.1.11 Hands-Free/Ringer Tone Enable (HF/RTE: PCD3332-3) 5.1.12 Volume control outputs (VOL1 and VOL2) 5.1.13 Ringer volume settings 5.1.14 Dial Mode Output /Key-Tone Enable (DMO/KTE) 5.1.15 Keyboard inputs/outputs 5.2 Keyboards 5.2.1 Keyboard function keys 5.2.2 Diode options 5.2.3 Hook modes 6 6.1 6.1.1 6.1.2 6.1.3 6.1.4 6.1.5 6.1.6 7 8 9 10 10.1 10.2 10.2.1 10.2.2 OPERATING PROCEDURES Operating modes On-hook mode or ringer mode Dial mode Reset delay time Programming mode Ringer mode (PCD3332-2) Ringer mode (PCD3332-3/S) LIMITING VALUES CHARACTERISTICS PACKAGE OUTLINES SOLDERING Introduction DIP Soldering by dipping or by wave Repairing soldered joints 2 1997 Jan 13 Philips Semiconductors Product specification Multistandard pulse/tone repertory diallers/ringers 1 Features PCD3332-2; PCD3332-3; PCD3332-S - F/E: register recall Flash or Earth - M/S: Mark-to-Space ratio selection (3 : 2 or 2 : 1) - APT: Access Pause Timing selection - TBT: Tone Burst Time selection - FTS: Flash Time Selection -...