PCD3332-2 Datasheet | NXP Semiconductors

FEATURES GENERAL DESCRIPTION ORDERING INFORMATION PINNING PCD3332-2 PCD3332-3 PCD3332-S FUNCTIONAL DESCRIPTION 10.3 10.3.1 10.3.2 10.3.3 11 12 PCD3332-2; PCD3332-3; PCD3332-S SO Reflow soldering Wave soldering Repairing soldered joints DEFINITIONS LIFE SUPPORT APPLICATIONS Pin description Supply terminals (VDD and VSS) Oscillator input/output (XTAL1 and XTAL2) Chip enable and frequency discriminator input (CE/FDI) 5.1.4 Cradle switch input (CSI) 5.1.5 Reset input (RESET) 5.1.6 Pulse dial and flash output (DP/FL) 5.1.7 Mute output (MUTE) 5.1.8 DTMF output (TONE) 5.1.9 Register recall (EARTH) 5.1.10 Ringer Tone Enable (RTE: PCD3332-2/S) 5.1.11 Hands-Free/Ringer Tone Enable (HF/RTE: PCD3332-3) 5.1.12 Volume control outputs (VOL1 and VOL2) 5.1.13 Ringer volume settings 5.1.14 Dial Mode Output /Key-Tone Enable (DMO/KTE) 5.1.15 Keyboard inputs/outputs 5.2 Keyboards 5.2.1 Keyboard function keys 5.2.2 Diode options 5.2.3 Hook modes 6 6.1 6.1.1 6.1.2 6.1.3 6.1.4 6.1.5 6.1.6 7 8 9 10 10.1 10.2 10.2.1 10.2.2 OPERATING PROCEDURES Operating modes On-hook mode or ringer mode Dial mode Reset delay time Programming mode Ringer mode (PCD3332-2) Ringer mode (PCD3332-3/S) LIMITING VALUES CHARACTERISTICS PACKAGE OUTLINES SOLDERING Introduction DIP Soldering by dipping or by wave Repairing soldered joints 2 1997 Jan 13 Philips Semiconductors Product specification Multistandard pulse/tone repertory diallers/ringers 1 FEATURES PCD3332-2; PCD3332-3; PCD3332-S - F/E: register recall Flash or Earth - M/S: Mark-to-Space ratio selection (3 : 2 or 2 : 1) - APT: Access Pause Timing selection - TBT: Tone Burst Time selection - FTS: Flash Time Selection - P/T: Pulse or Tone (DTMF) mode selection - RMS: Ringer Melody Selection (PCD3332-2 and PCD3332-S) - RFS: Ringer input frequency range selection (19.5 to 57 Hz or 14.4 to 68 Hz) (PCD3332-3) - Ringer tone generator - Ringer-input frequency discriminator - Ringer melody selection via keypad - Volume control for loudspeaker phones (PCD3332-3) -...