Datasheet4U Logo Datasheet4U.com

PCA8886 - Dual channel capacitive proximity switch

General Description

The PCA8886 is a low power dual channel capacitive proximity switch that uses a patented (EDISEN) digital method to detect a change in capacitance on remote sensing plates.

Key Features

  • Dynamic proximity switch.
  • Digital processing method.
  • Automatic calibration.
  • Adjustable sensitivity, can be made very high.
  • Adjustable response time.
  • Wide input capacitance range (10 pF to 60 pF).
  • A large distance (several meters) between the sensing plate and the IC is possible.
  • Open-drain output (P-type MOSFET, external load between pin and ground).
  • Output configurable as push-button, toggle, or pulse.
  • Wide voltage operating range (VDD = 3 V to.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PCA82C251 CAN transceiver COMSET
PCA82C251 CAN transceiver Philips
PCA0102A LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP Z-Communications
PCA0163A LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP Z-Communications
PCA0174A-LF Telecommunications - Satellite Z-Communications

Other Datasheets by NXP Semiconductors

Part Number Description
PCA8885 Capacitive 8-channel touch and proximity sensor
PCA82C200 STAND-ALONE CAN-CONTROLLER
PCA82C250 CAN controller interface
PCA82C250T CAN controller interface
PCA82C251 CAN transceiver for 24 V systems

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PCA8886 Dual channel capacitive proximity switch with auto-calibration and large voltage operating range Rev. 3 — 14 March 2014 Product data sheet 1. General description The PCA8886 is a low power dual channel capacitive proximity switch that uses a patented (EDISEN) digital method to detect a change in capacitance on remote sensing plates. Changes in the static capacitance (as opposed to dynamic capacitance changes) are automatically compensated using continuous auto-calibration. Remote sensing plates (for example, conductive foil) can be connected directly to the IC1 or remotely using a coaxial cable. 2.