900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




NXP Semiconductors Electronic Components Datasheet

PCA8550 Datasheet

4-bit multiplexed/1-bit latched 5-bit I2C EEPROM

No Preview Available !

INTEGRATED CIRCUITS
PCA8550
4-bit multiplexed/1-bit latched 5-bit I2C
EEPROM
Product specification
1998 Sep 29
Philips
Semiconductors


NXP Semiconductors Electronic Components Datasheet

PCA8550 Datasheet

4-bit multiplexed/1-bit latched 5-bit I2C EEPROM

No Preview Available !

Philips Semiconductors
4-bit multiplexed/1-bit latched 5-bit I2C EEPROM
Product specification
PCA8550
FEATURES
4-bit 2-to-1 multiplexer, 1-bit latch
5-bit internal non-volatile register
Override input forces all outputs to logic 0
Internal non-volatile register write/readable via I2C bus
Write-protect pin enables/disables I2C writes to register
2.5V multiplexed outputs
3.3V non-multiplexed output (latched)
5V tolerant inputs
Useful for ’jumperless’ configuration of PC motherboards
Designed for use in Pentium Pro/Pentium IIsystems
Pentium II is a registered trademark of Intel Corporation
PIN CONFIGURATION
I2C SCL 1
I2C SDA 2
OVERRIDE# 3
MUX_IN A 4
MUX_IN B 5
MUX_IN C 6
MUX_IN D 7
GND 8
16 VCC
15 WP
14 NON_MUXED_OUT
13 MUX_SELECT
12 MUX_OUT A
11 MUX_OUT B
10 MUX_OUT C
9 MUX_OUT D
SW00216
DESCRIPTION
The primary function of the 4-bit 2-to-1 I2C multiplexer is to select
either a 4-bit input or data from a non-volatile register and drive this
value onto the output pins. One additional non-multiplexed register
output is also provided. The non-multiplexed output is latched to
prevent output value changes during I2C writes to the non-volatile
register. A write protect input is provided to enable/disable the ability
to write to the non-volatile register. An ‘‘override” input feature forces
all outputs to logic 0.
ORDERING INFORMATION
PACKAGES
TEMPERATURE RANGE
16-Pin Plastic SO
0°C to +70°C
16-Pin Plastic SSOP
0°C to +70°C
16-Pin Plastic TSSOP
0°C to +70°C
OUTSIDE NORTH AMERICA NORTH AMERICA
PCA8550D
PCA8550D
PCA8550DB
PCA8550DB
PCA8550PW
PCA8550PW DH
DRAWING NUMBER
SOT109-1
SOT338-1
SOT403-1
FUNCTIONAL DESCRIPTION
When the MUX_SELECT signal is logic 0, the multiplexer will select
the data from the non-volatile register to drive on the MUX_OUT
pins. When the MUX_SELECT signal is logic 1, the multiplexer will
select the MUX_IN lines to drive on the MUX_OUT pins. The
MUX_SELECT signal is also used to latch the NON_MUXED_OUT
signal which outputs data from the non-volatile register. The
NON_MUXED_OUT signal latch is transparent when MUX_SELECT
is in a logic 0 state, and will latch data when MUX_SELECT is in a
logic 1 state. When the active-LOW OVERRIDE# signal is set to
logic 0 and the MUX_SELECT signal is at a logic 0, all outputs will
be driven to logic 0. This information is summarized in Table 1.
The write protect (WP) input is used to control the ability to write the
contents of the 5-bit non-volatile register. If the WP signal is logic 0,
the I2C bus will be able to write the contents of the non-volatile
register. If the WP signal is logic 1, data will not be allowed to be
written into the non-volatile register.
The factory default for the contents of the non-volatile register are all
logic 0. These stored values can be read or written using the I2C
bus (described in the next section).
The OVERRIDE#, WP, MUX_IN, and MUX_SELECT signals have
internal pullup resistors. See the DC and AC Characteristics for
hysteresis and signal spike suppression figures.
1998 Sep 29
2 853-2015 20105


Part Number PCA8550
Description 4-bit multiplexed/1-bit latched 5-bit I2C EEPROM
Maker NXP
PDF Download

PCA8550 Datasheet PDF






Similar Datasheet

1 PCA8550 4-bit multiplexed/1-bit latched 5-bit I2C EEPROM
NXP





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy