Datasheet4U Logo Datasheet4U.com

PCA85232 - LCD driver

Description

The PCA85232 is a peripheral device which interfaces to almost any Liquid Crystal Display (LCD)1 with low multiplex rates.

It generates the drive signals for any static or multiplexed LCD containing up to four backplanes and up to 160 segments.

It can easily be cascaded for larger LCD applications.

Features

  • AEC-Q100 compliant for automotive.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PCA82C251 CAN transceiver COMSET
PCA82C251 CAN transceiver Philips
PCA0102A LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP Z-Communications
PCA0163A LOW COST - HIGH PERFORMANCE PHASE LOCKED LOOP Z-Communications
PCA0174A-LF Telecommunications - Satellite Z-Communications

Other Datasheets by NXP Semiconductors

Part Number Description
PCA85233 LCD driver
PCA8521 Infrared remote control transmitter RC5
PCA85276 LCD driver
PCA85132 LCD driver
PCA85133 Automotive LCD driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PCA85232 LCD driver for low multiplex rates Rev. 4 — 8 April 2015 Product data sheet 1. General description The PCA85232 is a peripheral device which interfaces to almost any Liquid Crystal Display (LCD)1 with low multiplex rates. It generates the drive signals for any static or multiplexed LCD containing up to four backplanes and up to 160 segments. It can easily be cascaded for larger LCD applications. The PCA85232 is compatible with most microcontrollers and communicates via the two-line bidirectional I2C-bus. Communication overheads are minimized by a display RAM with auto-incremental addressing, by hardware subaddressing, and by display memory switching (static and duplex drive modes). For a selection of NXP LCD segment drivers, see Table 29 on page 56. 2.
Published: |