Datasheet4U Logo Datasheet4U.com

P3T1084UK - digital temperature sensor

Description

P3T1084UK is a temperature-to-digital converter with a -40 °C to +125 °C range.

It uses an on-chip band gap temperature sensor and A-to-D conversion technique with overtemperature detection.

Features

  • I3C (up to 12.5 MHz) and I2C (up to 3.4 MHz) interface.
  • Supply range: 1.4 V to 3.6 V.
  • Programmable undertemperature and overtemperature alerts.
  • Resolution: 12 bits (0.0625 °C).
  • Accuracy:.
  • 1.4 V < VCC < 3.6 V.
  • ±0.4 °C (maximum) from.
  • 20 °C to +85 °C.
  • ±1 °C (maximum) from -40 °C to +125 °C.
  • Low quiescent current: 6 μA supply current.
  • ESD protection exceeds 2000 V HBM per JESD22-A114 and 1000 V CDM pe.

📥 Download Datasheet

📁 Similar Datasheet

Other Datasheets by NXP

Full PDF Text Transcription

Click to expand full text
P3T1084UK I3C, I2C-bus, 0.4 °C accuracy, digital temperature sensor Rev. 1.1 — 11 July 2024 Product data sheet 1 General description P3T1084UK is a temperature-to-digital converter with a -40 °C to +125 °C range. It uses an on-chip band gap temperature sensor and A-to-D conversion technique with overtemperature detection. The device contains a number of data registers, including a Configuration register (Conf) to store the device settings (such as device operation mode), and a temperature register (Temp) to store the digital temp reading, which can be communicated by a controller via the 2-wire serial I3C (up to 12.5 MHz) and I2C (up to 3.4 MHz) interface.
Published: |