OM3105N Overview
OM3105P The OM3105P is a hybrid integrated circuit intended for inductive proximity detectors in a tubular construction, especially the M5 hollow stud. The circuit performs a make function (version 1): when actuated, the current flows through the load, which can be for example a LED or an optocoupler.
OM3105N Key Features
- Extra small dimensions (3 x 20 mm max.)
- Wide supply voltage range (6 to 35 V)
- Supply current typical 1.5 mA (output stage switched off)
- High output current (250 mA max.)
- RC filter on the supply lines
- PNP output transistor protected against transients from the inductive load
- Circuit protected against wrong polarity connection of the supply voltage
- Electronic short-circuit protection
- Detection distance adjustable by a chip resistor (Rd), type 1206
- Only a simple coil in one part is required; e.g. the OM2860 requires a coil in two parts