Datasheet4U Logo Datasheet4U.com

NX3L1G53 - Low-ohmic Single-pole Double-throw Analog Switch

General Description

The NX3L1G53 is a low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer.

It has a digital select input (S), two independent inputs/outputs (Y0 and Y1), a common input/output (Z) and an active LOW enable input (E).

Key Features

  • Wide supply voltage range from 1.4 V to 4.3 V.
  • Very low ON resistance (peak):.
  • 1.6  (typical) at VCC = 1.4 V.
  • 1.0  (typical) at VCC = 1.65 V.
  • 0.55  (typical) at VCC = 2.3 V.
  • 0.50  (typical) at VCC = 2.7 V.
  • 0.50  (typical) at VCC = 4.3 V.
  • Break-before-make switching.
  • High noise immunity.
  • ESD protection:.
  • HBM JESD22-A114F Class 3A exceeds 7500 V.
  • MM JESD22-A115-A exceeds 200 V.
  • CDM AEC-Q100-011 revision B exceeds 1000 V.
  • I.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NX3L1G3157 Low-ohmic single-pole double-throw analog switch NXP Semiconductors
NX3L1G66 Low-voltage analog switch NXP Semiconductors
NX3L1T3157 Low-ohmic single-pole double-throw analog switch NXP Semiconductors
NX3L1T5157 Low-ohmic single-pole double-throw switch NXP Semiconductors
NX3L2G384 Dual low-ohmic single-pole single-throw analog switch NXP Semiconductors

Other Datasheets by NXP Semiconductors

Part Number Description
NX3L1G3157-Q100 Low-ohmic single-pole double-throw analog switch
NX3L1G384 Low-ohmic single-pole single-throw analog switch
NX3L1G66-Q100 Low-ohmic single-pole single-throw analog switch
NX3L1T384 Single-pole Single-throw Analog Switch
NX3L1T53 Low-ohmic Single-pole Double-throw Analog Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NX3L1G53 Low-ohmic single-pole double-throw analog switch Rev. 7.1 — 15 November 2016 Product data sheet 1. General description The NX3L1G53 is a low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer. It has a digital select input (S), two independent inputs/outputs (Y0 and Y1), a common input/output (Z) and an active LOW enable input (E). When pin E is HIGH, the switch is turned off. Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall times. The NX3L1G53 allows signals with amplitude up to VCC to be transmitted from Z to Y0 or Y1; or from Y0 or Y1 to Z. Its low ON resistance (0.5 ) and flatness (0.13 ) ensures minimal attenuation and distortion of transmitted signals.