NX3L1G3157-Q100 Datasheet | NXP Semiconductors

description The NX3L1G3157-Q100 is a low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer. It has a digital select input (S), two independent inputs/outputs (Y0 and Y1) and a mon input/output (Z). Schmitt trigger action at the digital input makes the circuit tolerant to slower input rise and fall times. The NX3L1G3157-Q100 allows signals with amplitude up to VCC to be transmitted from Z to Y0 or Y1; or from Y0 or Y1 to Z. Its low ON resistance (0.5 ) and flatness (0.13 ) ensures minimal attenuation and distortion of transmitted signals. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits - Automotive product qualification in accordance with AEC-Q100 (Grade 1) - Specified from - 40 C to +85 C and from - 40 C to +125 C - Wide supply voltage range from 1.4 V to 4.3 V - Very low ON resistance: - 1.6  (typical) at VCC = 1.4 V - 1.0  (typical) at VCC = 1.65 V - 0.55  (typical) at VCC = 2.3 V - 0.50  (typical) at VCC = 2.7 V - 0.50  (typical) at VCC = 4.3 V - Break-before-make switching - High noise immunity - ESD protection: - MIL-STD-883, method 3015 Class 3A exceeds 7500 V - HBM JESD22-A114F Class 3A exceeds 7500 V - MM JESD22-A115-A exceeds 200 V (C = 200 p F, R = 0 ) - CDM AEC-Q100-011 revision B exceeds 1000 V - IEC61000-4-2 contact discharge exceeds 8000 V for switch ports - CMOS low-power consumption - Latch-up performance exceeds 100 m A per JESD78 Class II Level A - Direct interface with TTL levels at 3.0 V - Control input accepts voltages above supply voltage - High current handling capability (350 m A continuous current under 3.3 V supply) NXP Semiconductors Low-ohmic single-pole double-throw analog switch 3. Applications - Cell phone - PDA - Portable media player 4. Ordering information Table 1. Ordering information Type number Package Tempe...