NXP Semiconductors
Data Sheet: Technical Data
MKW36Z/35Z Data Sheet
An ultra low power, highly integrated Bluetooth® Low
Energy 5.0 wireless microcontroller
MKW36Z512
Rev. 7, 09/2019
MKW36Z512VHT4
MKW36Z512VFP4
MKW35Z512VHT4
48 LQFN
40 "Wettable" HVQFN
7x7 mm Pitch 0.5 mm 6x6 mm Pitch 0.5 mm
Multi-Standard Radio
System peripherals
• 2.4 GHz Bluetooth Low Energy (Bluetooth LE) version
• Nine MCU low-power modes to provide power
5.0 compliant supporting up to 8 simultaneous
optimization based on application requirements
hardware connections
• DC-DC Converter supporting Buck and Bypass
• Generic FSK modulation
operating modes
• Data Rate: 250, 500 and 1000 kbps
• Direct memory access (DMA) Controller
• Modulations: GFSK BT = 0.3, 0.5, and 0.7;
• Computer operating properly (COP) watchdog
FSK/MSK
• Serial wire debug (SWD) Interface and Micro Trace
• Modulation Index: 0.32, 0.5, 0.7, and 1.0
buffer
• Typical Receiver Sensitivity (Bluetooth LE 1 Mbps) =
• Bit Manipulation Engine (BME)
-95 dBm
• Typical Receiver Sensitivity (250 kbps GFSK-BT=0.5, Analog Modules
h=0.5) = -99 dBm
• 16-bit Analog-to-Digital Converter (ADC)
• Programmable Transmitter Output Power: -30 dBm to
• 6-bit High Speed Analog Comparator (CMP)
+3.5 dBm
• 1.2 V voltage reference (VREF)
• Low external component counts for low cost application
• On-chip balun with single ended bidirectional RF port Timers
• 16-bit low-power timer (LPTMR)
MCU and Memories
• 3 Timer/PWM Modules(TPM): One 4 channel TPM
• 256 KB program flash memory plus 256 KB FlexNVM
and two 2 channel TPMs
on KW36Z
• Programmable Interrupt Timer (PIT)
• 8 KB FlexRAM supporting EEPROM emulation on
• Real-Time Clock (RTC)
KW36Z
• 512 KB program flash memory on KW35Z
• Up to 48 MHz Arm® Cortex®-M0+ core
• On-chip 64 KB SRAM
Communication interfaces
• 2 serial peripheral interface (SPI) modules
• 2 inter-integrated circuit (I2C) modules
• Low Power UART (LPUART) module with LIN
Low Power Consumption
support (2x LPUART on KW36Z)
• Transceiver current (DC-DC buck mode, 3.6 V supply)
• Carrier Modulator Timer (CMT)
• FlexCAN module (with CAN FD support up to 3.2
Mbps baudrate) on KW36Z
NXP reserves the right to change the production detail specifications as may be
required to permit improvements in the design of its products.