MK66FX1M0VLQ18 Datasheet | NXP Semiconductors

features such as Dual USB and a 10/100 Mbit/s Ethernet MAC. These devices maintain hardware and software patibility with the existing Kinetis family. This product also offers: - Integration of a High Speed USB Physical Transceiver - Greater performance flexibility with a High Speed Run mode - Smarter peripherals with operation in Stop modes MK66FN2M0VMD18 MK66FX1M0VMD18 MK66FN2M0VLQ18 MK66FX1M0VLQ18 144 MAPBGA (MD) 144 LQFP (LQ) 13 mm x 13 mm Pitch 1 20 mm x 20 mm Pitch mm 0.5 mm Performance Memories and memory expansion - Up to 180 MHz ARM Cortex-M4 based core with DSP - Up to 2 MB program flash memory on non- instructions and Single Precision Floating Point unit Flex Memory devices with 256 KB RAM - Up to 1 MB program flash memory and 256 KB of System and Clocks Flex NVM on Flex Memory devices - Multiple low-power modes to provide power - 4 KB Flex RAM on Flex Memory devices optimization based on application requirements - Flex Bus external bus interface and SDRAM controller - Memory protection unit with multi-master protection - 3 to 32 MHz main crystal oscillator Analog modules - 32 k Hz low power crystal oscillator - Two 16-bit SAR ADCs and two 12-bit DAC - 48 MHz internal reference - Four analog parators (CMP) containing a 6-bit Security DAC and programmable reference input - Voltage reference 1.2V - Hardware random-number generator - Supports DES, AES, SHA accelerator (CAU) munication interfaces - Multiple levels of embedded flash security - Ethernet controller with MII and RMII interface to Timers external PHY and hardware IEEE 1588 capability - USB high-/full-/low-speed On-the-Go with on-chip - Four Periodic interrupt timers high speed transceiver - 16-bit low-power timer - USB full-/low-speed OTG with on-chip transceiver - Two 16-bit low-power timer PWM modules - Two CAN, three SPI and four I2C...