MCXN947VDFT Datasheet | NXP Semiconductors

MCXNx4x 32-bit Arm Cortex-M33 @ 150 MHz (N94x and N54x) Rev. 6 - 06/2024 Data Sheet: Technical Data Dual Arm®Cortex®-M33 core 32-bit MCU with Trust Zone®, up to 2 MB Flash, 512 KB SRAM, e IQ® Neutron NPU, Power Quad DSP, Edge Lock® Secure Enclave, Core Profile Features - Dual Arm® Cortex®-M33 150 MHz with 618 Core Mark® (4.12 Core Mark/ MHz) for each core - 4.8 GOPs edge AI/ML acceleration with NPU - Platform Security with Edge Lock® Secure Enclave, Core Profile. - -40 °C to +125 °C temperature range. - Down to 57 µA/MHz active current, 6 µA Power down mode with RTC enabled and 512 KB SRAM retention, 2 µA Deep Power-down mode with RTC active and 32 KB SRAM. MCXN54x MCXN94x 184VFBGA 9 x 9 x 0.86 mm, 0.5 mm 100HLQFP 14 x 14 x 1.4 mm, 0.5 mm NOTE All information on the HLQFP package is preliminary and pending qualification. Cores - Primary: Arm® 32-bit Cortex®-M33 CPU with Trust Zone®, MPU, FPU, SIMD, ETM and CTI - Secondary: Arm® 32-bit Cortex®-M33 CPU Processing Accelerators - DSP Accelerator (Power QUAD, with Co-Processor interface) - Smart DMA (co-processor for applications such as parallel camera interface and keypad scanning) - e IQ® Neutron N1-16 Neural Processing Unit - Power Line munications (PLC) Controller Memories - Up to 2 MB (2 x 1MB Bank) on chip Flash memory supporting Flash Swap and Read While Write, with ECC (support one bit correction and two bits detection) - Cache Engine with 16 KB RAM - Up to 512 KB RAM, configurable as up to 416 KB with ECC (support one bit correction and two bits...