LPC811M001FDH16
LPC811M001FDH16 is 32-bit ARM Cortex-M0+ microcontroller manufactured by NXP Semiconductors.
- Part of the LPC81xM comparator family.
- Part of the LPC81xM comparator family.
description
The LPC81x M are an ARM Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 30 MHz. The LPC81x M support up to 16 k B of flash memory and 4 k B of SRAM.
The peripheral plement of the LPC81x M includes a CRC engine, one I2C-bus interface, up to three USARTs, up to two SPI interfaces, one multi-rate timer, self wake-up timer, and state-configurable timer, one parator, function-configurable I/O ports through a switch matrix, an input pattern match engine, and up to 18 general-purpose I/O pins.
2. Features and benefits
- System:
- ARM Cortex-M0+ processor, running at frequencies of up to 30 MHz with single-cycle multiplier and fast single-cycle I/O port.
- ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC).
- System tick timer.
- Serial Wire Debug (SWD) and JTAG boundary scan modes supported.
- Micro Trace Buffer (MTB) supported.
- Memory:
- Up to 16 k B on-chip flash programming memory with 64 Byte page write and erase.
- Up to 4 k B SRAM.
- ROM API support:
- Boot loader.
- USART drivers.
- I2C drivers.
- Power profiles.
- Flash In-Application Programming (IAP) and In-System Programming (ISP).
- Digital peripherals:
- High-speed GPIO interface connected to the ARM Cortex-M0+ IO bus with up to 18 General-Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors, programmable open-drain mode, input inverter, and glitch filter.
- High-current source output driver (20 m A) on four pins.
- High-current sink driver (20 m A) on two true open-drain pins.
- GPIO interrupt generation capability with boolean pattern-matching feature on eight GPIO inputs.
- Switch matrix for flexible configuration of each I/O pin function.
NXP Semiconductors
LPC81x M
32-bit ARM Cortex-M0+ microcontroller
- State Configurable Timer/PWM (SCTimer/PWM) with input and output functions (including capture and match) assigned to pins through the switch matrix.
- Multiple-channel multi-rate timer (MRT) for repetitive interrupt generation at...
