Datasheet4U Logo Datasheet4U.com

LPC54101 - 32-bit ARM Cortex-M4/M0+ microcontroller

Description

The LPC5410x are ARM Cortex-M4 based microcontrollers for embedded applications.

Optional ARM Cortex-M0+ coprocessor.

104 kB of on-chip SRAM.

Up to 512 kB on-chip flash.

State-Configurable Timer with PWM capabilities (SCTimer/PWM).

Features

  • Dual processor cores: ARM Cortex-M4 and ARM Cortex-M0+. The M0+ core runs at the same frequency as the M4 core. Both cores operate up to a maximum frequency of 150 MHz.
  • ARM Cortex-M4 core (version r0p1):.
  • ARM Cortex-M4 processor, running at a frequency of up to 150 MHz, using the same clock as the Cortex-M4.
  • Floating Point Unit (FPU) and Memory Protection Unit (MPU).
  • ARM Cortex-M4 built-in Nested Vectored Interrupt Controller (NVIC).
  • Non-maskable Interrupt (NMI.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LPC5410x 32-bit ARM Cortex-M4/M0+ MCU; 104 kB SRAM; 512 kB flash, 3 x I2C, 2 x SPI, 4 x USART, 32-bit counter/ timers, SCTimer/PWM, 12-bit 5.0 Msamples/sec ADC Rev. 2.12 — 3 September 2020 Product data sheet 1. General description The LPC5410x are ARM Cortex-M4 based microcontrollers for embedded applications. These devices include: • Optional ARM Cortex-M0+ coprocessor. • 104 kB of on-chip SRAM. • Up to 512 kB on-chip flash. • State-Configurable Timer with PWM capabilities (SCTimer/PWM). • RTC/alarm timer. • 24-bit Multi-Rate Timer (MRT). • 12-bit 5.0 Msamples/sec ADC. • Repetitive Interrupt Timer (RIT). • Windowed Watchdog Timer (WWDT). • Two SPIs. • Three Fast-mode plus I2C-bus interfaces with high-speed slave mode. • Four USARTs. • Five general-purpose timers.
Published: |