LPC1102LVUK Datasheet | NXP Semiconductors

LPC111x LV/LPC11xx LVUK 32-bit ARM Cortex-M0 MCU; up to 32 k B flash, 8 k B SRAM; 8-bit ADC Rev. 2 - 10 October 2012 Product data sheet 1. General description The LPC111x LV/LPC11xx LVUK is an ARM Cortex-M0-based, low-cost 32-bit MCU family, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size pared to existing 8/16-bit architectures. The LPC111x LV/LPC11xx LVUK operate at CPU frequencies of up to 50 MHz. The peripherals of the LPC111x LV/LPC11xx LVUK include up to 32 k B of flash memory, up to 8 k B of SRAM data memory, a Fast-mode Plus I2C-bus interface, one SSP/SPI interface, one UART, four general-purpose counter/timers, an 8-bit ADC, and up to 27 general-purpose I/O pins. 2. Features and benefits - System: - ARM Cortex-M0 processor, running at frequencies of up to 50 MHz. - ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC). - Serial Wire Debug. - System tick timer. - Memory: - Up to 32 k B on-chip flash programming memory with a 256 byte page erase function. - Up to 8 k B SRAM. - In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software. - Digital peripherals: - Up to 27 General-Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors and a configurable open-drain mode. - GPIO pins can be used as edge and level sensitive interrupt sources. - High-current output driver on one pin. - High-current sink drivers on two I2C-bus pins in Fast-mode Plus. - Four general-purpose counter/timers with up to 7 capture inputs and 13 match outputs. - Programmable windowed WDT. - Analog peripherals: 8-bit ADC with input multiplexing among up to 8 pins. - Serial interfaces: .Data Sheet.net/ Datasheet pdf - http://..co.kr/ NXP Semiconductors LPC111x LV/LPC11xx...