LD6938 Datasheet PDF (Dual low-dropout regulators)

LD6938 - Dual low-dropout regulators

Description

The LD6938 series consists of small-size dual Low DropOut regulators (LDO).

Each device delivers two times 300 mA with a typical voltage drop of 240 mV at full output load.

The devices offer two separate fixed nominal output voltages (VO(nom)) in the range of 1.2 V to 3.3 V.

Features

High Power Supply Rejection Ratio (PSRR).
Low output noise.
Low quiescent current.
Extremely low standby current ( 0.1 A).
Soft start circuit to limit inrush current.
Output current limiter with foldback circuit.
Overtemperature protection.
Delayed output circuit for second LDO (optional).
Auto discharge or high-ohmic mode for output when disabled.
WLCSP6 with 0.4 mm pitch and package size of 1.2 mm  0.8 mm  0.47 mm 1.3.

Datasheet Details

Part number	LD6938
Manufacturer	NXP
File Size	227.69 KB
Description	Dual low-dropout regulators
Datasheet	LD6938 Datasheet
Additional preview pages of the LD6938 datasheet.

📁 Similar Datasheet

LD690-C350 - Infrared Laser Diode (Roithner Lasertechnik)

LD6902 - High Voltage Linear Regulator (Leadtrend)

LD6903 - 60mA High Voltage Linear Regulator (Leadtrend)

LD6904 - 120mA Negative Voltage Linear Regulator (Leadtrend)

LD6905 - Adjustable Precision Shunt Regulators (Lighting Device Technologies)

LD6909 - 300mA CMOS LDO Regulator (Leadtrend)

LD6911 - Ultra-Fast CMOS LDO Regulator (Leadtrend)

LD6912 - Ultra-Fast CMOS LDO Regulator (Leadtrend)

LD6914 - Adjustable CMOS LDO Regulator (Leadtrend)

LD6915 - Ultra-Fast CMOS LDO Regulator (Leadtrend)

Full PDF Text Transcription

Click to expand full text

LD6938 series Dual low-dropout regulators, low noise, 300 mA Rev. 1 — 11 July 2013 Objective data sheet 1. Product profile 1.1 General description The LD6938 series consists of small-size dual Low DropOut regulators (LDO). Each device delivers two times 300 mA with a typical voltage drop of 240 mV at full output load. The devices offer two separate fixed nominal output voltages (VO(nom)) in the range of 1.2 V to 3.3 V. The LDO has an integrated Soft start to control the inrush current during start-up. The output mode, when disabled, can be high-ohmic 3-state or auto discharge. Optionally a delayed start-up circuit is available for the second output. The devices are available in a 6-bump Wafer-Level Chip-Scale Package (WLCSP) with a height of 0.47 mm. 1.

Published: Jan 26, 2015 |