Datasheet4U Logo Datasheet4U.com

KMA310 - Programmable angle sensor

Description

The KMA310/A is a single channel magnetic angle sensor.

Magnetoresistive (MR) sensor bridges and mixed signal IC are integrated into a single package.

The module has integrated filters and is optimized for PCB-less designs.

Features

  • High precision sensor for magnetic angular.
  • High temperature range up to 180 °C measurement.
  • Ratiometric analog output voltage or push pull.
  • Single package sensor module with output stage compliant with SAE J2716 SENT integrated filters for improved electromagnetic using pulse shaping compatibility (EMC).
  • Overvoltage protection up to 18 V.
  • Automotive qualified in accordance with AEC-Q100 Rev-H.
  • Programmable user adjustments.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
KMA3D0N20SA N-Channel MOSFET KEC
KMA3D6N20SA N-Channel MOSFET KEC
KMA3D7P20SA P-Channel MOSFET KEC
KMA010-xxx Board to Board Interconnecttions Advanced Interconnections
KMA010P20Q P-Ch Trench MOSFET KEC

Other Datasheets by NXP Semiconductors

Part Number Description
KMA310A Programmable angle sensor
KMA320 Dual channel programmable angle sensor
KMA320A Dual channel programmable angle sensor
KMA199 Programmable angle sensor
KMA200 Programmable angle sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
KMA310/A Programmable angle sensor IC Rev. 1 — 22 October 2019 Product data sheet 1 General description The KMA310/A is a single channel magnetic angle sensor. Magnetoresistive (MR) sensor bridges and mixed signal IC are integrated into a single package. The module has integrated filters and is optimized for PCB-less designs. The IC allows user-specific adjustments of angular range, zero angle, and clamping voltages. The settings are stored permanently in a non-volatile memory (NVM). The programmable angle sensor is pre-programmed, pre-calibrated and therefore, ready to use.
Published: |