FXOS8700CQ Datasheet | NXP Semiconductors

description FXOS8700CQ is a small, low-power, 3-axis, linear accelerometer and 3-axis, magnetometer bined into a single package. The device features a selectable I2C or point-to-point SPI serial interface with 14-bit accelerometer and 16-bit magnetometer ADC resolution along with smart-embedded functions. FXOS8700CQ has dynamically selectable acceleration full-scale ranges of ±2 g/±4 g/±8 g and a fixed magnetic measurement range of ±1200 μT. Output data rates (ODR) from 1.563 Hz to 800 Hz are selectable by the user for each sensor. Interleaved magnetic and acceleration data is available at ODR rates of up to 400 Hz. FXOS8700CQ is available in a plastic QFN package and it is guaranteed to operate over the extended temperature range of - 40 °C to +85 °C. 2. Features and benefits - plete 6-axis, e-pass hardware solution - 1.95 V to 3.6 V VDD supply voltage, 1.62 V to 3.6 V VDDIO voltage - ±2 g/±4 g/±8 g dynamically selectable acceleration full-scale range - ±1200 µT magnetic sensor full-scale range - Output data rates (ODR) from 1.563 Hz to 800 Hz for each sensor, and up to 400 Hz when operated in hybrid mode with both sensors active - Low noise: < 126 μg/√Hz acceleration noise density at 200-Hz bandwidth, < 100 n T/√Hz magnetic noise density at 100-Hz bandwidth - 14-bit ADC resolution for acceleration measurements - 16-bit ADC resolution for magnetic measurements - Low power: 240 μA current consumption at 100 Hz, and 80 μA at 25 Hz with both sensors active - Embedded programmable acceleration event functions - Freefall and motion detection - Transient detection - Vector-magnitude change detection - Pulse and tap detection (single and double) - Orientation detection (portrait/landscape) - Embedded programmable magnetic event functions - Threshold detection - Vector-magnitude change detection - Autonomous magnetic min/max detection - Autonomous hard-iron calibration NXP Semiconductors 6-axis sensor with integrated linear accelerometer and magnetometer -...