CBTL02043A; CBTL02043B
3.3 V, 2 differential channel, 2 : 1 multiplexer/demultiplexer
switch
Rev. 4.1 — 30 March 2015
Product data sheet
1. General description
CBTL02043A/B is a 2 differential channel, 2-to-1 multiplexer/demultiplexer switch for
USB 3.1, PCI Express Generation 3, or other high-speed serial interface applications. The
CBTL02043A/B can switch two differential signals to one of two locations. Using a unique
design technique, NXP has minimized the impedance of the switch such that the
attenuation observed through the switch is negligible, and also minimized the
channel-to-channel skew as well as channel-to-channel crosstalk, as required by the
high-speed serial interface. CBTL02043A/B allows expansion of existing high-speed ports
for extremely low power.
The device's pinouts are optimized to match different application layouts. CBTL02043A
has input and output pins on the opposite of the package, and is suitable for edge
connector(s) with different signal sources on the motherboard. CBTL02043B has outputs
on both sides of the package, and the device can be placed between two connectors to
multiplex differential signals from a controller. Please refer to Section 8 for layout
examples.
2. Features and benefits
2 bidirectional differential channel, 2 : 1 multiplexer/demultiplexer
High-speed signal switching for 10 Gbps applications
High bandwidth: 10 GHz at 3 dB
Low insertion loss:
0.5 dB at 100 MHz
1.3 dB at 4.0 GHz
Low return loss: 13.5 dB at 4 GHz
Low crosstalk: 35 dB at 4 GHz
Low off-state isolation: 20 dB at 4 GHz
Low intra-pair skew: 5 ps typical
Low inter-pair skew: 35 ps maximum
VDD operating range: 3.3 V 10 %
Shutdown pin (XSD) for power-saving mode
Standby current less than 1 A
ESD tolerance:
2000 V HBM
1000 V CDM
DHVQFN20 package