Datasheet4U Logo Datasheet4U.com

CBT3857 - 10-bit bus switch with 10 kohm pull-down termination resistors

Description

This 10-bit bus switch is designed for 3 V to 3.6 V VCC operation and SSTL_2 output enable (OE) input levels.

When OE is LOW, the 10-bit bus switch is on and port A is connected to port B.

When OE is HIGH, the switch is open, and a high-impedance state exists between the two ports.

Features

  • Enable signal is SSTL_2 compatible.
  • Optimized for use in Double Data Rate (DDR) SDRAM.

📥 Download Datasheet

Datasheet Details

Part number CBT3857
Manufacturer NXP Semiconductors
File Size 68.64 KB
Description 10-bit bus switch with 10 kohm pull-down termination resistors
Datasheet download datasheet CBT3857 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CBT3861 10-bit bus switch NXP Semiconductors
CBT3861 10-bit bus switch nexperia
CBT3125 Quadruple FET bus switch nexperia
CBT3244A Octal bus switch NXP Semiconductors
CBT3244A Octal bus switch nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
CBT3125 Quadruple FET bus switch
CBT3244 Octal bus switch with Quad Output Enables
CBT3245 Octal bus switch with output enable
CBT3245A Octal bus switch
CBT3253 Dual 1-of-4 FET multiplexer/demultiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS CBT3857 10-bit bus switch with 10 kΩ pull-down termination resistors Product specification Supersedes data of 1998 Dec 10 1999 Sep 14 Philips Semiconductors Philips Semiconductors Product specification 10-bit bus switch with 10 kΩ pull-down termination resistors CBT3857 FEATURES • Enable signal is SSTL_2 compatible • Optimized for use in Double Data Rate (DDR) SDRAM applications DESCRIPTION This 10-bit bus switch is designed for 3 V to 3.6 V VCC operation and SSTL_2 output enable (OE) input levels. When OE is LOW, the 10-bit bus switch is on and port A is connected to port B. When OE is HIGH, the switch is open, and a high-impedance state exists between the two ports.
Published: |