Datasheet4U Logo Datasheet4U.com

74LVC8T245 - 8-bit dual supply translating transceiver

Description

The 74LVC8T245; 74LVCH8T245 are 8-bit dual supply translating transceivers with 3-state outputs that enable bidirectional level translation.

Features

  • Wide supply voltage range:.
  • VCC(A): 1.2 V to 5.5 V.
  • VCC(B): 1.2 V to 5.5 V.
  • High noise immunity.
  • Complies with JEDEC standards:.
  • JESD8-7 (1.2 V to 1.95 V).
  • JESD8-5 (1.8 V to 2.7 V).
  • JESD8C (2.7 V to 3.6 V).
  • JESD36 (4.5 V to 5.5 V).
  • ESD protection:.
  • HBM JESD22-A114F Class 3A exceeds 4000 V.
  • MM JESD22-A115-B exceeds 200 V.
  • CDM JESD22-C101E exceeds 1000 V.
  • Maximum data rates:.
  • 420 Mbps (3.3 V to 5.0 V translation).
  • 210.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LVC8T245 8-bit dual supply translating transceiver nexperia
74LVC8T245-Q100 8-bit dual supply translating transceiver nexperia
74LVC8T595 Dual supply 8-bit serial-in/serial-out or parallel-out shift register nexperia
74LVC823A 9-bit D-type flip-flop nexperia
74LVC823A-Q100 9-bit D-type flip-flop nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
74LVC821A 10-bit D-type flip-flop
74LVC823A 9-bit D-type flip-flop
74LVC827A 10-bit buffer/line driver
74LVC841A 10-bit transparent latch
74LVC86 Quad 2-input EXCLUSIVE-OR gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LVC8T245; 74LVCH8T245 8-bit dual supply translating transceiver; 3-state Rev. 3 — 12 December 2011 Product data sheet 1. General description The 74LVC8T245; 74LVCH8T245 are 8-bit dual supply translating transceivers with 3-state outputs that enable bidirectional level translation. They feature two data input-output ports (pins An and Bn), a direction control input (DIR), an output enable input (OE) and dual supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 1.2 V and 5.5 V making the device suitable for translating between any of the low voltage nodes (1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An, OE and DIR are referenced to VCC(A) and pins Bn are referenced to VCC(B).
Published: |