Datasheet4U Logo Datasheet4U.com

74HCT9046A - PLL

General Description

The 74HCT9046A.

Key Features

  • Operation power supply voltage range from 4.5 V to 5.5 V.
  • Low power consumption.
  • Complies with JEDEC standard no. 7A.
  • Inhibit control for ON/OFF keying and for low standby power consumption.
  • center frequency up to 17 MHz (typical) at VCC = 5.5 V.
  • Choice of two phase comparators:.
  • PC1:.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HCT9046A PLL with bandgap controlled VCO Philips
74HCT9046A PLL nexperia
74HCT9014 Nine wide Schmitt trigger buffer/line driver Philips
74HCT9015 Nine wide Schmitt trigger buffer/line driver Philips
74HCT9114 Nine wide Schmitt trigger buffer nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
74HCT00 Quad 2-input NAND gate
74HCT08-Q100 Quad 2-input AND gate
74HCT11 Triple 3-input AND gate
74HCT123 Dual retriggerable monostable multivibrator
74HCT123-Q100 Dual retriggerable monostable multivibrator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HCT9046A PLL with band gap controlled VCO Rev. 7 — 29 February 2016 Product data sheet 1. General description The 74HCT9046A. This device features reduced input threshold levels to allow interfacing to TTL logic levels. Inputs also include clamp diodes, this enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2. Features and benefits  Operation power supply voltage range from 4.5 V to 5.5 V  Low power consumption  Complies with JEDEC standard no. 7A  Inhibit control for ON/OFF keying and for low standby power consumption  center frequency up to 17 MHz (typical) at VCC = 5.