Datasheet4U Logo Datasheet4U.com

74HCT595 - 8-bit serial-in serial or parallel-out shift register

Download the 74HCT595 datasheet PDF. This datasheet also covers the 74HC595 variant, as both devices belong to the same 8-bit serial-in serial or parallel-out shift register family and are provided as variant models within a single manufacturer datasheet.

General Description

The 74HC595; 74HCT595 is an 8-bit serial-in/serial or parallel-out shift register with a storage register and 3-state outputs.

Both the shift and storage register have separate clocks.

Key Features

  • Wide supply voltage range from 2.0 V to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • 8-bit serial input.
  • 8-bit serial or parallel output.
  • Storage register with 3-state outputs.
  • Shift register with direct clear.
  • 100 MHz (typical) shift out frequency.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Complies with JEDEC standards:.
  • JESD8C (2.7 V to 3.6 V).
  • JESD7A.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74HC595-NXP.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
74HCT595 8-BIT SHIFT REGISTER Diodes
74HCT595 serial or parallel-out shift register nexperia
74HCT595-Q100 serial or parallel-out shift register nexperia
74HCT595BQ serial or parallel-out shift register nexperia
74HCT595D serial or parallel-out shift register nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
74HCT573 Octal D-type transparent latch
74HCT574 Octal D-type flip-flop
74HCT00 Quad 2-input NAND gate
74HCT08-Q100 Quad 2-input AND gate
74HCT11 Triple 3-input AND gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC595; 74HCT595 8-bit serial-in, serial or parallel-out shift register with output latches; 3-state Rev. 12 — 20 March 2024 Product data sheet 1. General description The 74HC595; 74HCT595 is an 8-bit serial-in/serial or parallel-out shift register with a storage register and 3-state outputs. Both the shift and storage register have separate clocks. The device features a serial input (DS) and a serial output (Q7S) to enable cascading and an asynchronous reset MR input. A LOW on MR will reset the shift register. Data is shifted on the LOW-to-HIGH transitions of the SHCP input. The data in the shift register is transferred to the storage register on a LOW-to-HIGH transition of the STCP input.