Datasheet4U Logo Datasheet4U.com

74HCT423 - Dual retriggerable monostable multivibrator

Download the 74HCT423 datasheet PDF. This datasheet also covers the 74HC423 variant, as both devices belong to the same dual retriggerable monostable multivibrator family and are provided as variant models within a single manufacturer datasheet.

General Description

74HC423; 74HCT423 are high-speed Si-gate CMOS devices that are pin compatible with Low power Schottky TTL (LSTTL).

They are specified in compliance with JEDEC standard no.

7A.

Key Features

  • DC triggered from active HIGH or active LOW inputs.
  • Retriggerable for very long pulses up to 100 % duty factor.
  • Direct reset terminates output pulse.
  • Schmitt-trigger action on all inputs except for the reset input.
  • Complies with JEDEC standard no. 7A.
  • ESD protection:.
  • HBM JESD22-A114F exceeds 2000 V.
  • MM JESD22-A115-A exceeds 200 V.
  • Specified from 40 C to +85 C and from 40 C to +125 C NXP Semiconductors 74HC423; 74HCT423 Dual retriggerable mon.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74HC423-NXP.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
74HCT423 High-Speed CMOS Logic Dual Retriggerable Monostable Multivibrators Texas Instruments
74HCT423 Dual retriggerable monostable multivibrator Philips
74HCT42 BCD to decimal decoder 1-of-10 Philips
74HCT4002 Dual 4-input NOR gate nexperia
74HCT4002-Q100 Dual 4-input NOR gate nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
74HCT4002 Dual 4-input NOR gate
74HCT4002-Q100 Dual 4-input NOR gate
74HCT4002D-Q100 Dual 4-input NOR gate
74HCT40105 4-bit x 16-word FIFO register
74HCT4017 Johnson decade counter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC423; 74HCT423 Dual retriggerable monostable multivibrator with reset Rev. 6 — 19 December 2011 Product data sheet 1. General description 74HC423; 74HCT423 are high-speed Si-gate CMOS devices that are pin compatible with Low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC423; 74HCT423 dual retriggerable monostable multivibrator with reset has two methods of output pulse width control. 1. The minimum pulse width is essentially determined by the selection of an external resistor (REXT) and capacitor (CEXT), see Section 12.1. 2. Once triggered, the basic output pulse width may be extended by retriggering the gated active LOW-going edge input (nA) or the active HIGH-going edge input (nB).