Datasheet4U Logo Datasheet4U.com

74HCT154 - 4-to-16 line decoder/demultiplexer

This page provides the datasheet information for the 74HCT154, a member of the 74HC154 4-to-16 line decoder/demultiplexer family.

Description

The 74HC154; 74HCT154 is a 4-to-16 line decoder/demultiplexer.

It decodes four binary weighted address inputs (A0 to A3) to sixteen mutually exclusive outputs (Y0 to Y15).

Features

  • 16-line demultiplexing capability.
  • Decodes 4 binary-coded inputs into 16 mutually-exclusive outputs.
  • Complies with JEDEC standard no. 7A.
  • Input levels:.
  • For 74HC154: CMOS level.
  • For 74HCT154: TTL level.
  • ESD protection:.
  • HBM JESD22-A114F exceeds 2000 V.
  • MM JESD22-A115-A exceeds 200 V.
  • Multiple package options.
  • Specified from 40 C to +85 C and 40 C to +125 C 3. Ordering information Table 1. Ordering information Type number Package T.

📥 Download Datasheet

Datasheet preview – 74HCT154

Datasheet Details

Part number 74HCT154
Manufacturer NXP
File Size 180.83 KB
Description 4-to-16 line decoder/demultiplexer
Datasheet download datasheet 74HCT154 Datasheet
Additional preview pages of the 74HCT154 datasheet.

📁 Similar Datasheet

  • 74HCT154 - 4-to-16 line decoder/demultiplexer (nexperia)
  • 74HCT154D - 4-to-16 line decoder/demultiplexer (nexperia)
  • 74HCT151 - 8-input multiplexer (Philips)
  • 74HCT151 - 8-input multiplexer (nexperia)
  • 74HCT151-Q100 - 8-input multiplexer (nexperia)
  • 74HCT151D - 8-input multiplexer (nexperia)
  • 74HCT151DB - 8-input multiplexer (nexperia)
  • 74HCT151PW - 8-input multiplexer (nexperia)
  • 74HCT153 - Dual 4-input multiplexer (nexperia)
  • 74HCT153 - Dual 4-input multiplexer (Philips)
Other Datasheets by NXP

Full PDF Text Transcription

Click to expand full text
74HC154; 74HCT154 4-to-16 line decoder/demultiplexer Rev. 7 — 29 February 2016 Product data sheet 1. General description The 74HC154; 74HCT154 is a 4-to-16 line decoder/demultiplexer. It decodes four binary weighted address inputs (A0 to A3) to sixteen mutually exclusive outputs (Y0 to Y15). The device features two input enable (E0 and E1) inputs. A HIGH on either of the input enables forces the outputs HIGH. The device can be used as a 1-to-16 demultiplexer by using one of the enable inputs as the multiplexed data input. When the other enable input is LOW the addressed output will follow the state of the applied data. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2.
Published: |