Datasheet4U Logo Datasheet4U.com

74HC153 - Dual 4-input multiplexer

Description

The 74HC153; 74HCT153 is a dual 4-input multiplexer.

Features

  • Input levels:.
  • For 74HC153: CMOS level.
  • For 74HCT153: TTL level.
  • Non-inverting outputs.
  • Separate enable input for each output.
  • Common select inputs.
  • Complies with JEDEC standard no. 7A.
  • Permits multiplexing from n lines to 1 line.
  • Enable line provided for cascading (n lines to 1 line).
  • ESD protection:.
  • HBM JESD22-A114F exceeds 2000 V.
  • MM JESD22-A115-A exceeds 200.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC153 Dual 4-input multiplexer nexperia
74HC153 Dual 4-input multiplexer Philips
74HC153 Dual 4-Line To 1-Line Data Selectors/Multiplexers Texas Instruments
74HC153 Dual 4-Input Data Selector/Multiplexer Motorola
74HC153-Q100 Dual 4-input multiplexer nexperia

Other Datasheets by NXP Semiconductors

Part Number Description
74HC151-Q100 8-input multiplexer
74HC151D-Q100 8-input multiplexer
74HC151PW-Q100 8-input multiplexer
74HC154 4-to-16 line decoder/demultiplexer
74HC157 Quad 2-input multiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC153; 74HCT153 Dual 4-input multiplexer Rev. 6 — 11 May 2016 Product data sheet 1. General description The 74HC153; 74HCT153 is a dual 4-input multiplexer. The device features independent enable inputs (nE) and common data select inputs (S0 and S1). For each multiplexer, the select inputs select one of the four binary inputs and routes it to the multiplexer output (nY). A HIGH on E forces the corresponding multiplexer outputs LOW. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2. Features and benefits  Input levels:  For 74HC153: CMOS level  For 74HCT153: TTL level  Non-inverting outputs  Separate enable input for each output  Common select inputs  Complies with JEDEC standard no.
Published: |