Datasheet4U Logo Datasheet4U.com

NCA1042B-Q1 - High-speed CAN Transceiver

General Description

7.1.

OVERVIEW 14 7.2.

FUNCTIONAL BLOCK DIAGRAM 14 7.3.

Key Features

  • Fully compatible with the ISO11898-2 standard.
  • Ideal passive behavior to the CAN bus when the supply voltage is off.
  • I/O voltage range supports 3.3V and 5V MCU.
  • Power supply voltage.
  • VIO: 2.8V to 5.5V.
  • VCC: 4.5V to 5.5V.
  • Bus fault protection of -58V to +58V.
  • Bus common-mode voltage of -30V to +30V.
  • Transmit data (TXD) dominant time out function.
  • Bus dominant time out function in standby mode.
  • Very low-current Standby mode with wake-up capab.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCA1206NPO100J100TRPF Multilayer Ceramic Chip Capacitors NIC
NCA1206NPO100J16TRPF Multilayer Ceramic Chip Capacitors NIC
NCA1206NPO100J25TRPF Multilayer Ceramic Chip Capacitors NIC
NCA1206NPO100J50TRPF Multilayer Ceramic Chip Capacitors NIC
NCA1206NPO101J100TRPF Multilayer Ceramic Chip Capacitors NIC

Other Datasheets by NOVOSENSE

Part Number Description
NCA1042B High-speed CAN Transceiver
NCA1042 High-speed CAN Transceiver
NCA1021S LIN transceiver
NCA1051 High-speed CAN Transceiver
NCA1051A High-speed CAN Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCA1042B-Q1 High-speed CAN Transceiver with Standby Mode Datasheet (EN) 1.2 Product Overview The NCA1042B-Q1 is a high-speed CAN transceiver that provides an interface between a Controller Area Network (CAN) protocol controller and the physical two-wire CAN bus. The NCA1042B-Q1 implements the CAN physical layer as defined in ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5. This implementation enables reliable communication in the CAN FD fast phase at data rates up to 5 Mbit/s. The NCA1042B-Q1 provides thermal protection and transmit data dominant time out function. Key Features  Fully compatible with the ISO11898-2 standard  Ideal passive behavior to the CAN bus when the supply voltage is off  I/O voltage range supports 3.3V and 5V MCU  Power supply voltage  VIO: 2.8V to 5.