Datasheet4U Logo Datasheet4U.com

HA-1380 - (HA-138x) Crystal Clock Oscillators

Description

The HA-1380 Series of quartz crystal oscillators provide enable/disable 3-state CMOS compatible signals for bus connected systems.

Supplying pin 1 of the HA-1380 units with a logic “1" enables its Pin 5 output.

In the disabled mode, Pin 5 presents a high impedance to the load.

Features

  • Wide frequency range.
  • 0.5MHz to 36MHz.
  • User specified tolerance available.
  • Will withstand vapor phase temperatures of 253°C for 4 minutes maximum.
  • Space-saving alternative to discrete component oscillators.
  • High shock resistance, to 3000g.
  • All metal, resistance weld, hermetically sealed package Electrical Connection Pin 1 4 5 8 Connection Enable Input Grd & Case Output VDD.
  • Low Jitter.
  • High Q Crystal actively tuned.

📥 Download Datasheet

Datasheet Details

Part number HA-1380
Manufacturer NEL Frequency Controls
File Size 451.73 KB
Description (HA-138x) Crystal Clock Oscillators
Datasheet download datasheet HA-1380 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HA-1366WR 5.5W Audio Power Amplifier Hitachi
HA-1370 (HA-137x/138x) CMOS Compatible Enable/Disable ETC
HA-1371 (HA-137x/138x) CMOS Compatible Enable/Disable ETC
HA-1377 (HA-137x/138x) CMOS Compatible Enable/Disable ETC
HA-1379 (HA-137x/138x) CMOS Compatible Enable/Disable ETC

Other Datasheets by NEL Frequency Controls

Part Number Description
HA-1381 (HA-138x) Crystal Clock Oscillators
HA-1381 (HA-138x) Crystal Clock Oscillators
HA-1387 (HA-138x) Crystal Clock Oscillators
HA-1387 (HA-138x) Crystal Clock Oscillators
HA-1389 (HA-138x) Crystal Clock Oscillators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CRYSTAL CLOCK OSCILLATORS CMOS Compatible Enable/Disable Data Sheet 8820C Rev. L HA-1380 Series Description The HA-1380 Series of quartz crystal oscillators provide enable/disable 3-state CMOS compatible signals for bus connected systems. Supplying pin 1 of the HA-1380 units with a logic “1" enables its Pin 5 output. In the disabled mode, Pin 5 presents a high impedance to the load. All units are resistance welded in an all metal package, offering RFI shielding, and are designed to survive standard wave soldering operations without damage. Insulated standoffs to enhance board cleaning are standard. Features • Wide frequency range– 0.
Published: |