UPD168113 Datasheet PDF (SERIAL CONTROL 7-CHANNEL H-BRIDGE DRIVER)

UPD168113 - SERIAL CONTROL 7-CHANNEL H-BRIDGE DRIVER

Description

The µ PD168113 is a serial control 7-channel H-bridge driver that consists of a CMOS controller and a MOS output stage.

It can reduce the current consumption and the voltage loss at the output stage compared with a conventional driver using bipolar transistors, thanks to employment of a MOS process.

Features

Seven H-bridge circuits employing power MOS FET.
Low-voltage driving VDD = 2.7 to 3.6 V VM = 2.7 to 5.5 V.
Output on-state resistance: 1.0 Ω TYP. , 1.5 Ω MAX. (sum of top and bottom stage).
Output current DC current: 0.4 A/ch (when each channel is used independently) Peak current: 0.7 A/ch (when each channel is used independently) DC current: 0.5 A/ch (when used independently) Peak current: 0.7 A/ch (when used independently).
Inp.

Datasheet Details

Part number	UPD168113
Manufacturer	NEC
File Size	771.22 KB
Description	SERIAL CONTROL 7-CHANNEL H-BRIDGE DRIVER
Datasheet	UPD168113 Datasheet
Additional preview pages of the UPD168113 datasheet.

📁 Similar Datasheet

uPD168110 - MICROSTEP DRIVER (Renesas)

UPD168104 - 6-CHANNEL OPERATIONAL AMPLIFIER (Renesas)

uPD16818 - MONOLITHIC DUAL H-BRIDGE DRIVER (Renesas)

uPD16836 - THREE-PHASE SPINDLE MOTOR DRIVER (Renesas)

UPD16876 - Single Pch High-Side Switch for USB (NEC Electronics)

UPD160032A - 480-OUTPUT TFT-LCD SOURCE DRIVER (Renesas)

uPD160088 - 480-OUTPUT TFT-LCD SOURCE DRIVER (Renesas)

UPD160300 - 192-BIT AC-PDP DRIVER (NEC Electronics)

uPD161608 - 176-RGB x 220-DOT 1-CHIP DRIVER (Renesas)

uPD161802 - 240 OUTPUTS TFT-LCD SOURCE DRIVER (Renesas)

Full PDF Text Transcription

Click to expand full text

DATA SHEET MOS INTEGRATED CIRCUIT µ PD168113 SERIAL CONTROL 7-CHANNEL H-BRIDGE DRIVER DESCRIPTION The µ PD168113 is a serial control 7-channel H-bridge driver that consists of a CMOS controller and a MOS output stage. It can reduce the current consumption and the voltage loss at the output stage compared with a conventional driver using bipolar transistors, thanks to employment of a MOS process. The µ PD168113 can drive various motor coils by controlling the serial, so that the number of signal lines necessary for controlling the motor can be decreased. The package is a 56-pin WQFN that helps reduce the mounting area and height. The µ PD168113 can be used to drive two stepping motors, or two DC motors and one coil.

Published: Jul 25, 2005 |