Datasheet4U Logo Datasheet4U.com

UPC1935 - DC-DC CONVERTER CONTROL IC

Description

The µ PC1935 is a low-voltage input DC-DC converter control IC that can configure a three-output (step-up × 2, inverted output × 1) DC-DC converter at an input voltage of 3, 3.3, or 5 V.

Features

  • Low supply voltage: 2.5 V (MIN. ).
  • Operating voltage range: 2.5 to 20 V (breakdown voltage: 30 V).
  • Can control three output channels.
  • Timer latch circuit for short-circuit protection.
  • Ceramic capacitor with low capacitance (0.1 µ F) can be used for short-circuit protection.
  • Dead times of channels 2 (step-up) and 3 (inverted output) can be set from external resistors. Dead time of channel 1 (step-up) is internally fixed to 85 %.
  • S.

📥 Download Datasheet

Datasheet preview – UPC1935

Datasheet Details

Part number UPC1935
Manufacturer NEC
File Size 185.25 KB
Description DC-DC CONVERTER CONTROL IC
Datasheet download datasheet UPC1935 Datasheet
Additional preview pages of the UPC1935 datasheet.

📁 Similar Datasheet

  • UPC1008C - Phase Frequexcy Detector (ETC)
  • UPC1031H - UPC1031H (ETC)
  • UPC1032H - Dual Low Noise Preamplifier Silicon Bipolar Monolithic Intergated Circuit (NEC Electronics)
  • UPC1037H - Analog IC (ETC)
  • UPC1182H - 5 Watt Audio Power Amplifier (ETC)
  • UPC1185H2 - Power Amplifier (ETC)
  • UPC1210C - Dolby B-Type Noise Reduction Processor (ETC)
  • UPC1213 - UPC1031H (ETC)
  • UPC1213C - Audio Power Amplifier (NEC Electronics)
  • UPC1215V - Electronic Tuning AM Radio Receiver / Silicon Bipolar Monolithic Integrated Circuit (NEC Electronics)
Other Datasheets by NEC
  • UPC1933 - DC-DC CONVERTER CONTROL IC
  • UPC1934 - DC-DC CONVERTER CONTROL IC
  • UPC1905 - SWITCHING REGULATOR CONTROL CIRCUIT FOR 500 kHz OPERATION
  • UPC1906 - SWITCHING REGULATOR CONTROL CIRCUIT FOR 500 kHz OPERATION
  • UPC1906 - SWITCHING REGULATOR CONTROL CIRCUIT FOR 500 kHz OPERATION
  • UPC1909 - SWITCHING REGULATOR CONTROL IC
  • UPC1943 - ADJUSTABLE PRECISION SHUNT REGULATORS
  • UPC1944 - ADJUSTABLE PRECISION SHUNT REGULATORS

Full PDF Text Transcription

Click to expand full text
DATA SHEET BiCMOS INTEGRATED CIRCUIT µ PC1935 DC-DC CONVERTER CONTROL IC DESCRIPTION The µ PC1935 is a low-voltage input DC-DC converter control IC that can configure a three-output (step-up × 2, inverted output × 1) DC-DC converter at an input voltage of 3, 3.3, or 5 V. Because of its wide operating voltage range, this IC can also be used to control DC-DC converters using an AC adapter for input. FEATURES • Low supply voltage: 2.5 V (MIN.) • Operating voltage range: 2.5 to 20 V (breakdown voltage: 30 V) • Can control three output channels. • Timer latch circuit for short-circuit protection. • Ceramic capacitor with low capacitance (0.1 µ F) can be used for short-circuit protection. • Dead times of channels 2 (step-up) and 3 (inverted output) can be set from external resistors.
Published: |