BIPOLAR ANALOG INTEGRATED CIRCUIT
μ PC1251GR-9LG, μ PC1251MP-KAA, μ PC358GR-9LG
www.datasheet4u.com SINGLE POWER SUPPLY DUAL OPERATIONAL AMPLIFIERS
The μ PC1251GR-9LG, μ PC1251MP-KAA, μ PC358GR-9LG are dual operational amplifiers which are designed to
operate for a single power supply. It includes features of low-voltage operation, a common-mode input voltage that
range from V− (GND) level, an output from a V− (GND) level that is determined by the output stage of class C push-
pull circuit and a 50 μA(TYP.) constant current, and a low current consumption.
In addition, this can operate at both positive and negative power supply and it can be extensively used in various
The μ PC1251GR-9LG, μ PC1251MP-KAA which expands temperature type is suited for wide operating ambient
temperature use, and μ PC358GR-9LG is used for general purposes.
A DC parameter selection that is compatible to operational amplifiers is also available.
μ PC451GR-9LG, μ PC324GR-9LG which are quad types with the same circuit configuration are also available as
series of operational amplifiers.
• Input Offset Voltage
±2 mV (TYP.)
• Internal frequency compensation
• Input Offset Current
±5 nA (TYP.)
• Output short-circuit protection
• Large Signal Voltage Gain 100000 (TYP.)
• Small Package
The mounting area is reduced to 40% or 66% compared to the conventional 8-pin plastic SOP as shown in the
Subject part number
TSSOP (2.8 x 2.9)
(Mounting area ratio)
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. G17929EJ3V0DS00 (3rd edition)
Date Published December 2007 NS
Printed in Japan
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.