Datasheet4U Logo Datasheet4U.com

AC12FSMA - (AC12DSMA / AC12FSMA) 12A RESIN INSULATION TYPE TRIAC

General Description

The AC12DSMA and AC12FSMA are resin insulation type TRIACs with an effective current of 12 A (TC = 74°C).

10.5 MAX.

7 ±0.2 4.7 MAX.

Key Features

  • br>.
  • Insulation type TRIAC fully covered with resin on the entire case other than electrode leads.
  • Insulation voltage and conduction equal to conventional mica and polyester film.
  • Can be replaced with TO-220AB package.
  • High allowable on-current when using a single unit 0.8 ±0.1 2.54 TYP. 1.3 ±0.2 1.5 ±0.2 2.54 TYP. 13.5 MIN. 5 ±0.2 0.5 ±0.1 2.5 ±0.1 TRIAC 1: T1 2: T2 3: Gate.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AC1206 THICK FILM CHIP RESISTORS YAGEO
AC121 PNP Germanium Transistors Siemens
AC1210 THICK FILM CHIP RESISTORS YAGEO
AC1218 TO-8 CASCADABLE AMPLIFIERS TELEDYNE
AC1218 THICK FILM CHIP RESISTORS YAGEO

Other Datasheets by NEC (now Renesas Electronics)

Part Number Description
AC12FGM (AC12DGM - AC12FGM) 12A MOLD TRIAC
AC12DGM (AC12DGM - AC12FGM) 12A MOLD TRIAC
AC12DSMA (AC12DSMA / AC12FSMA) 12A RESIN INSULATION TYPE TRIAC
AC12EGM (AC12DGM - AC12FGM) 12A MOLD TRIAC
AC10DGM (AC10xGM) 10A MOLD TRIAC
AC10DSMA 10 A RESIN INSULATION TYPE TRIAC
AC10EGM (AC10xGM) 10A MOLD TRIAC
AC10FGM (AC10xGM) 10A MOLD TRIAC
AC10FSMA 10 A RESIN INSULATION TYPE TRIAC
AC16DGM (AC16DGM - AC16FGM) 16A MOLD TRIAC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com DATA SHEET AC12DSMA,AC12FSMA 12 A RESIN INSULATION TYPE TRIAC THYRISTORS DESCRIPTION The AC12DSMA and AC12FSMA are resin insulation type TRIACs with an effective current of 12 A (TC = 74°C). These products are covered with resin mold on the entire case and are electrically insulated with electrodes, giving them a 17 ±0.2 PACKAGE DRAWING (Unit: mm) 10.5 MAX. 7 ±0.2 4.7 MAX. φ 3.2 ±0.2 5 ±0.1 3.0 MAX. 2.8 ±0.2 considerable advantage over conventional TRIACs when mounting on a heatsink board or performing high-density mounting. These products features ratings and electrical characteristics equal to TO-220AB package TRIAC and a high reliability design. 12 ±0.