ALE14B09 Datasheet | NAIS

FEATURES 1. Ideal for magnetron and heater loads 2. Excellent heat resistance - This satisfies UL coil insulation class B 3. High insulation resistance - Creepage distance and clearances between contact and coil: Min. 8 mm .315 inch - Surge withstand voltage: Min. 10,000V 4. Low operating power - Nominal operating power: 400m W 24.9 .980 28.6 1.126 12.4 .488 24.9 .980 mm inch SPECIFICATIONS Contact Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Contact material Nominal switching capacity Max. switching power Rating (resistive load) Max. switching voltage Max. switching current Mechanical (at 180 cpm) Expected life Electrical (min. operations) (at 20 cpm) (Resistive load) 1 Form A Characteristics Max. operating speed (at rated load) 100 mΩ Initial insulation resistance- 1 Between open Silver alloy Initial breakdown contacts 16 A 277 V AC voltage- 2 Between contacts and coil 4,432 V A Initial surge voltage between contact . and coil- 3 277 V AC Operate time- 4 (at nominal voltage) 16 A Release time (with diode)- 4 (at nominal voltage) 2 × 106 Temperature rise (at nominal voltage) 105 Functional- 5 Shock resistance Destructive- 6 Vibration resistance Conditions for operation, transport and storage- 8 (Not freezing and condensing at low temperature) Unit weight Functional- 7 Destructive Ambient temp. Humidity 20 cpm Min. 1,000 MΩ (at 500 V DC) 1,000 Vrms for 1 min. 4,000 Vrms for 1 min. Min. 10,000 V Data She e Max. 20ms (at 20°C 68°F) Max. 20ms (at 20°C 68°F) Coil Nominal operating power Remarks 400 m W ∗ Specifications will vary with foreign standards certification ratings. - 1 Measurement at same location as “Initial breakdown voltage” section. - 2 Detection current: 10m A - 3 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981 - 4 Excluding contact bounce time. - 5 Half-wave pulse of sine wave: 11 ms; detection time: 10 µs - 6 Half-wave pulse of sine wave: 6 ms - 7 Detection time: 10 µs - 8 Refer to 5. Conditions for operation,...