Datasheet4U Logo Datasheet4U.com

PC33888APNB - Quad High-Side and Octal Low-Side Switch for Automotive

General Description

of many of these terminals can be found in the System/Application Information section beginning on page 19.

Key Features

  • Programming, control, and diagnostics are accomplished using a 16-bit SPI interface. Additionally, each high-side output has its own parallel input for pulse-width modulation (PWM) control if desired. The low sides share a single configurable direct input. The 33888 is available in two power packages. Features.
  • Dual 10 mΩ High Side, Dual 40 mΩ High Side, Octal 600 mΩ Low Side.
  • Full Operating Voltage of 6.0 V to 27 V.
  • SPI Control of High-Side Overcurrent Limit, High Si.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PC3388 IR ReceiverModules PengCheng Elec-tech
PC33880 Configurable Octal Serial Switch Motorola Semiconductor
PC33813 One Cylinder Small Engine Control IC Freescale Semiconductor
PC33814 Two Cylinder Small Engine Control IC Freescale Semiconductor
PC332 PCB Relay Picker

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
PC33888PNB Quad High-Side and Octal Low-Side Switch for Automotive
PC33887VW 5.0 A H-Bridge with Load Current Feedback
PC33889 System Basis Chip Lite with Low Speed Fault Tolerant CAN Interface
PC33889DW System Basis Chip Lite with Low Speed Fault Tolerant CAN Interface
PC33094DW IGNITION CONTROL

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Freescale Semiconductor, Inc. MOTOROLA SEMICONDUCTOR TECHNICAL DATA Document order number: MC33888 Rev 3.0, 10/2004 Product Preview Quad High-Side and Octal Low-Side Switch for Automotive The 33888 is a single-package combination of a power die with four discrete high-side MOSFETs (two 10 mΩ and two 40 mΩ) and an integrated IC control die consisting of eight low-side drivers (600 mΩ each) with appropriate control, protection, and diagnostic features. Programming, control, and diagnostics are accomplished using a 16-bit SPI interface. Additionally, each high-side output has its own parallel input for pulse-width modulation (PWM) control if desired. The low sides share a single configurable direct input. The 33888 is available in two power packages.