1SMB5920BT3 Datasheet | Motorola Semiconductor

MOTOROLA SEMICONDUCTOR TECHNICAL DATA 3 Watt Plastic Surface Mount Silicon Zener Diodes This plete new line of 3 Watt Zener Diodes offers the following advantages. Specification Features : - A plete Voltage Range - 3.3 to 200 Volts - Flat Handling Surface for Accurate Placement - Package Design for Top Side or Bottom Circuit Board Mounting - Available in Tape and Reel Mechanical Characteristics: CASE: Void-free, transfer-molded plastic MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260°C for 10 seconds FINISH: All external surfaces are corrosion resistant with readily solderable leads POLARITY: Cathode indicated by molded polarity notch. When operated in zener mode, cathode will be positive with respect to anode. MOUNTING POSITION: Any WEIGHT: Modified L-Bend providing more contact area to bond pad WAFER FAB LOCATION: Phoenix, Arizona ASSEMBLY/TEST LOCATION: Seremban, Malaysia 1SMB5913BT3 through 1SMB5956BT3 PLASTIC SURFACE MOUNT ZENER DIODES 3 WATTS 3.3- 200 VOLTS CASE 403A PLASTIC MAXIMUM RATINGS Rating DC Power Dissipation @ TL = 75°C, Measured at Zero Lead Length Derate above 75°C DC Power Dissipation @ TA = 25°C- Derate above 25°C Operating and Storage Junction Temperature Range - FR4 Board, within 1″ to device, using Motorola minimum remended footprint, as shown in case 403A outline dimensions spec. Symbol PD PD TJ, Tstg Value 3 40 830 6.6 - 65 to +150 Unit Watts m W/°C m W m W/°C °C ELECTRICAL CHARACTERISTICS (TL = 30°C unless otherwise noted.) (VF = 1.5 Volts Max @ IF = 200 m Adc for all types.) Nominal Zener Voltage VZ @ IZT Volts (Note 1) 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 Test Current IZT m A 113.6 104.2 96.1 87.2 79.8 73.5 66.9 60.5 55.1 50 45.7 41.2 37.5 34.1 31.2 28.8 Max Zener Impedance (Note 2) ZZT @ IZT Ohms 10 9 7.5 6 5 4 2 2 2.5 3 3.5 4 4.5 5.5 6.5 7 ZZK Ohms 500 500 500 500 500 350 250 200 200 400 400 500 500 550 550 550 @ IZK m A 1 1 1 1 1 1 1 1 1 0.5 0.5 0.5 0.25 0.25 0.25 0.25 Max Reverse Leakage Current...