UAA1041B
Key Features
- overvoltage, defective lamp and short circuit detection
- The lightbulbs L2, L3, L4, L5 are the turn signal indicators with the dashboard-light L6
- When switch S1 is closed, after a time delay of t1 (in our example t1 = 75 ms), the relay will be actuated
- The corresponding lightbulbs (L2, L3 or L4, L5) will flash at the oscillator frequency, independent of the battery voltage of 8.0 V to 18 V
- The flashing cycle stops and the circuit is reset to the initial position when switch S1 is open
- Overvoltage Detection Senses the battery voltage
- When this voltage exceeds 20.2 V (t
