MRS1504T3 Datasheet | Motorola Semiconductor

Features mesa epitaxial construction with glass passivation. Ideally suited for high frequency switching power supplies; free wheeling diodes and polarity protection diodes. - pact Package with J- Bend Leads Ideal for Automated Handling - Stable, High Temperature, Glass Passivated Junction Mechanical Characteristics: - Case: Molded Epoxy - Epoxy Meets UL94, VO at 1/8″ - Weight: 95 mg (approximately) - Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable - Maximum Temperature of 260°C / 10 Seconds for Soldering - Available in 12 mm Tape, 2500 Units per 13 inch Reel, Add “T3” Suffix to Part Number - Polarity: Notch in Plastic Body Indicates Cathode Lead - Marking: RGG MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (At Rated VR, TI = 118°C) Peak Repetitive Forward Current (At Rated VR, Square Wave, 20 k Hz, TI = 118°C) Non- Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) Storage / Operating Case Temperature Operating Junction Temperature Symbol VRRM VRWM VR IO IFRM IFSM Tstg, TC TJ STANDARD RECOVERY RECTIFIER 1.5 AMPERES 400 VOLTS CASE 403A- 03 SMB Value 400 Unit V 1.5 3.0 50 - 55 to 150 - 55 to 150 A A A °C °C THERMAL CHARACTERISTICS Thermal Resistance - Junction- to- Lead (2) Thermal Resistance - Junction- to- Ambient (on 1″ sq. Cu. PCB pattern) Rtjl Rtja TJ = 25°C 1.04 1.10 IR TJ = 25°C 1.0 0.5 18 79 °C/W ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (1), see Figure 2 (IF = 1.5 A) (IF = 2.25 A) Maximum Instantaneous Reverse Current, see Figure 4 (VR = 400 V) (VR = 200 V) (1) Pulse Test: Pulse Width ≤ 250 µs, Duty Cycle ≤ 2.0%. (2) Minimum pad size VF TJ = 100°C 0.96 1.02 TJ = 100°C 340 180 V m A This document contains information on a new product. Specifications and information herein are subject to change without notice. REV 1 Device ©Rectifier Motorola,...