MC145480

The MC145480 is 5V PCM CODEC-FILTER designed by Motorola.

Product Overview

Motorola

Part number	MC145480
Manufacturer	Motorola
File Size	410.06 KB
Description	5V PCM CODEC-FILTER
Datasheet	MC145480_Motorola.pdf
Additional preview pages of the MC145480 datasheet.

A PCM Codec Filter is used for digitizing and reconstructing the human voice. to digital converter (ADC) used to digitize voice, and ‘‘DECoder’’ for

n may be connected to the VAG pin for an inverting amplifier configuration if the input signal is already referenced to the VAG pin. The common mode range of the TI+ and TI.
pins is from 1.2 V, to VDD minus 2 V. This is an FET gate input. Connecting both TI+ and TI.
pins to V DD will place this amplifier’s output (TG) into a high.
impedance state, thus allowing the TG pin to serve as a high.
impedance input to the transmit filter. TI.
Transmit Analog Input.

📁 Similar Datasheet

MC145406 - EIA-232-D/V.28 driver/receiver (Philips)
MC145407F - CMOS RS-232C Driver / Receiver (ETC)
MC145415 - Dual Tunable Linear Phase Low Pass Sampled Data Filters (Motorola Semiconductor)
MC14541B - Programmable Timer (ON Semiconductor)
MC145423 - Universal Digital Loop Transceiver (Freescale Semiconductor)
MC14543B - BCD-to-Seven Segment Latch/Decoder/Driver (ON Semiconductor)
MC145450 - 1200 Baud FSK Modem (Motorola Semiconductor)
MC14549B - Successive Approximation Registers (ON Semiconductor)

Other Datasheets by Motorola

Published: Oct 13, 2006 |