MC145402 - Serial 13-Bit Linear Codec

Product Overview

Motorola

Datasheet Details

Part number	MC145402
Manufacturer	Motorola
File Size	130.88 KB
Description	Serial 13-Bit Linear Codec
Datasheet	MC145402 Datasheet
Additional preview pages of the MC145402 datasheet.

Product details

Description

VDD Positive Supply (Pin 16) The most positive power supply, typically + 5 V in split power supply configurations, or + 10 V in single supply systems. 5 V in split power supply configurations, or 0 V in single supply systems.

Features

mode. CCI Convert Clock Input (Pin 5) This input controls the complete conversion sequence during one MSI cycle and must receive a clock which is 32 times the frequency of MSI. The only exception to 32 times the frequency of MSI is during short.
cycle operation. See General Modes of Operation section. CCI must be synchronous and approximately rising edge aligned with MSI. MSI Master Sync Input (Pin 6) This pin determines the conversion rate for both the coder and the decoder. One A/D and.

📁 Similar Datasheet

MC145406 - EIA-232-D/V.28 driver/receiver (Philips)
MC145407F - CMOS RS-232C Driver / Receiver (ETC)
MC145415 - Dual Tunable Linear Phase Low Pass Sampled Data Filters (Motorola Semiconductor)
MC14541B - Programmable Timer (ON Semiconductor)
MC145423 - Universal Digital Loop Transceiver (Freescale Semiconductor)
MC14543B - BCD-to-Seven Segment Latch/Decoder/Driver (ON Semiconductor)
MC145450 - 1200 Baud FSK Modem (Motorola Semiconductor)
MC14549B - Successive Approximation Registers (ON Semiconductor)

Other Datasheets by Motorola

MC145403 - DRIVER/RECEIVERS
MC145404 - DRIVER/RECEIVERS
MC145405 - DRIVER/RECEIVERS
MC145407 - 5 Volt Only Driver / Recevier
MC145408 - DRIVER/RECEIVERS
MC145412 - Pulse/Tone Repertory Dialer Low Power SIilicon-Gate CMOS

Published: Jul 28, 2014 |