Datasheet4U Logo Datasheet4U.com

MC145166 - Dual PLLs for 46/49 MHz Cordless Telephones

Description

section.

Features

  • include a lock detect circuit for the transmit loop, illegal code default, and a 5 kHz tone output.
  • Synthesizes Up to Ten Channel Pairs Maximum Operating Frequency: 60 MHz @ Vin = 200 mV p.
  • p Operating Temperature Range:.
  • 40 to + 75°C Operating Voltage Range: 2.5 to 5.5 V On.
  • Chip Oscillator Circuit Supports External Crystal Lock Detect Signal Operating Power Consumption: 3.0 mA @ 3.0.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC145163 MC145163 PLL Integrated Circuits ETC
MC14516B Binary Up/Down Counter ON Semiconductor
MC14511 BCD-TO-SEVEN SEGMENT LATCH/DECODER/DRIVER UTC
MC14511B BCD-To-Seven Segment Latch/Decoder/Driver ON Semiconductor
MC14512B 8-Channel Data Selector ON Semiconductor

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC145160 Dual PLLs for 46/49 MHz Cordless Telephones
MC145162 60 MHz and 85 MHz Universal Programmable Dual PLL Frequency Synthesizers
MC145163 BCD / PLL
MC145165 Low-Voltage 60 MHz Universal Programmable Dual PLL Frequency Synthesizer
MC145167 Dual PLLs for 46/49 MHz Cordless Telephones

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MC145166/D MC145166 Dual PLLs for 46/49 MHz Cordless Telephones MC145167 CMOS These devices are dual phase–locked loop (PLL) frequency synthesizers in– tended for use primarily in 46/49 MHz cordless phones with up to 10 channels. These parts contain two mask–programmable counter ROMs for receive and transmit loops with two independent phase detect circuits. A common reference oscillator and reference divider are shared by the receive and transmit circuits. Frequency selection is accomplished via a 4–bit parallel input for the MC145166. The MC145167 utilizes a serial interface. Other features include a lock detect circuit for the transmit loop, illegal code default, and a 5 kHz tone output.
Published: |