Datasheet4U Logo Datasheet4U.com

MC12015 - MECL PLL COMPONENTS DUAL MODULUS PRESCALER

📥 Download Datasheet

Datasheet preview – MC12015

📁 Similar Datasheet

  • MC12012 - MECL Phase-Locked Loop Components (Freescale)
  • MC120 - Molded Coils (TOKO)
  • MC12026A - 1.1 GHz Dual Modulus Prescaler (ON Semiconductor)
  • MC1203N - LSI PMOS (ETC)
  • MC1203NA - LSI PMOS (ETC)
  • MC1203NB - LSI PMOS (ETC)
  • MC1206 - THICK FILM CHIP RESISTOR (RCD)
  • MC1206 - Multilayer SMD Ceramic Capacitors (Multicomp)
  • MC12060 - (MC12x6x) MTTL (ETC)
  • MC12060 - (MC12060 / MC12061) Crystal Oscillator (Motorola Semiconductor)
Other Datasheets by Motorola
  • MC12011 - MECL PLL COMPONENTS DUAL MODULUS PRESCALER
  • MC12012 - MECL PLL COMPONENTS
  • MC12013 - MECL PLL COMPONENTS DUAL MODULUS PRESCALER
  • MC12014 - Counter Control Logic
  • MC12016 - MECL PLL COMPONENTS DUAL MODULUS PRESCALER
  • MC12017 - MECL PLL COMPONENTS DUAL MODULUS PRESCALER
  • MC12018 - 520Mhz Dual Modulus Prescaler
  • MC12019 - DUAL MODULUS PRESCALER

Full PDF Text Transcription

Click to expand full text
Dual Modulus Prescaler The MC12015, MC12016 and MC12017 are dual modulus prescalers which will drive divide by 32 and 33, 40 and 41, and 64 and 65, respectively. An internal regulator is provided to allow these devices to be used over a wide range of power–supply voltages. The devices may be operated by applying a supply voltage of 5.0 Vdc ±10% at Pin 7, or by applying an unregulated voltage source from 5.5Vdc to 9.5 Vdc to Pin 8. • 225 MHz Toggle Frequency • Low–Power 7.5 mA Maximum at 6.8 V • Control Input and Output Are Compatible With Standard CMOS • Connecting Pins 2 and 3 Allows Driving One TTL Load • Supply Voltage 4.5 V to 9.
Published: |